lkml.org 
[lkml]   [2020]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: power: Correct interrupt flags in examples
Date
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted some
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/power/supply/act8945a-charger.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
index c7dfb7cecf40..cb737a9e1f16 100644
--- a/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/act8945a-charger.txt
@@ -33,7 +33,7 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
interrupt-parent = <&pioA>;
- interrupts = <45 GPIO_ACTIVE_LOW>;
+ interrupts = <45 IRQ_TYPE_LEVEL_LOW>;

active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
--
2.17.1
\
 
 \ /
  Last update: 2020-09-08 17:47    [W:0.046 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site