lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] dt-bindings: mfd: correct interrupt flags in examples
On Thu, 17 Sep 2020, Krzysztof Kozlowski wrote:

> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted same
> logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> # for BD70528
> Acked-by: Tim Harvey <tharvey@gateworks.com> # for gateworks-gsc.yaml
> Acked-by: Rob Herring <robh@kernel.org>
>
> ---
>
> Changes since v1:
> 1. Add acks

FYI, this should not bump the patch version.

> ---
> Documentation/devicetree/bindings/mfd/act8945a.txt | 2 +-
> Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++-
> Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 2 +-
> 3 files changed, 4 insertions(+), 3 deletions(-)

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2020-09-29 11:47    [W:0.061 / U:0.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site