lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2] tty: serial: lpuart: fix lpuart32_write usage
Date
The 2nd and 3rd parameter were wrongly used, and cause kernel abort when
doing kgdb debug.

Fixes: 1da17d7cf8e2c4("tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V2:
Fix poll init

drivers/tty/serial/fsl_lpuart.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 5a5a22d77841..645bbb24b433 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -649,26 +649,24 @@ static int lpuart32_poll_init(struct uart_port *port)
spin_lock_irqsave(&sport->port.lock, flags);

/* Disable Rx & Tx */
- lpuart32_write(&sport->port, UARTCTRL, 0);
+ lpuart32_write(&sport->port, 0, UARTCTRL);

temp = lpuart32_read(&sport->port, UARTFIFO);

/* Enable Rx and Tx FIFO */
- lpuart32_write(&sport->port, UARTFIFO,
- temp | UARTFIFO_RXFE | UARTFIFO_TXFE);
+ lpuart32_write(&sport->port, temp | UARTFIFO_RXFE | UARTFIFO_TXFE, UARTFIFO);

/* flush Tx and Rx FIFO */
- lpuart32_write(&sport->port, UARTFIFO,
- UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH);
+ lpuart32_write(&sport->port, UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH, UARTFIFO);

/* explicitly clear RDRF */
if (lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_RDRF) {
lpuart32_read(&sport->port, UARTDATA);
- lpuart32_write(&sport->port, UARTFIFO, UARTFIFO_RXUF);
+ lpuart32_write(&sport->port, UARTFIFO_RXUF, UARTFIFO);
}

/* Enable Rx and Tx */
- lpuart32_write(&sport->port, UARTCTRL, UARTCTRL_RE | UARTCTRL_TE);
+ lpuart32_write(&sport->port, UARTCTRL_RE | UARTCTRL_TE, UARTCTRL);
spin_unlock_irqrestore(&sport->port.lock, flags);

return 0;
@@ -677,7 +675,7 @@ static int lpuart32_poll_init(struct uart_port *port)
static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c)
{
lpuart32_wait_bit_set(port, UARTSTAT, UARTSTAT_TDRE);
- lpuart32_write(port, UARTDATA, c);
+ lpuart32_write(port, c, UARTDATA);
}

static int lpuart32_poll_get_char(struct uart_port *port)
--
2.28.0
\
 
 \ /
  Last update: 2020-09-29 10:53    [W:0.031 / U:10.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site