lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] dt-bindings: riscv: convert plic bindings to json-schema
Date
Convert device tree bindings for SiFive's PLIC to YAML format

Signed-off-by: Sagar Kadam <sagar.kadam@sifive.com>
---
.../interrupt-controller/sifive,plic-1.0.0.txt | 58 -------------
.../interrupt-controller/sifive,plic-1.0.0.yaml | 97 ++++++++++++++++++++++
2 files changed, 97 insertions(+), 58 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
deleted file mode 100644
index 6adf7a6..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-SiFive Platform-Level Interrupt Controller (PLIC)
--------------------------------------------------
-
-SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
-(PLIC) high-level specification in the RISC-V Privileged Architecture
-specification. The PLIC connects all external interrupts in the system to all
-hart contexts in the system, via the external interrupt source in each hart.
-
-A hart context is a privilege mode in a hardware execution thread. For example,
-in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
-privilege modes per hart; machine mode and supervisor mode.
-
-Each interrupt can be enabled on per-context basis. Any context can claim
-a pending enabled interrupt and then release it once it has been handled.
-
-Each interrupt has a configurable priority. Higher priority interrupts are
-serviced first. Each context can specify a priority threshold. Interrupts
-with priority below this threshold will not cause the PLIC to raise its
-interrupt line leading to the context.
-
-While the PLIC supports both edge-triggered and level-triggered interrupts,
-interrupt handlers are oblivious to this distinction and therefore it is not
-specified in the PLIC device-tree binding.
-
-While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
-"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
-contains a specific memory layout, which is documented in chapter 8 of the
-SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
-
-Required properties:
-- compatible : "sifive,plic-1.0.0" and a string identifying the actual
- detailed implementation in case that specific bugs need to be worked around.
-- #address-cells : should be <0> or more.
-- #interrupt-cells : should be <1> or more.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- reg : Should contain 1 register range (address and length).
-- interrupts-extended : Specifies which contexts are connected to the PLIC,
- with "-1" specifying that a context is not present. Each node pointed
- to should be a riscv,cpu-intc node, which has a riscv node as parent.
-- riscv,ndev: Specifies how many external interrupts are supported by
- this controller.
-
-Example:
-
- plic: interrupt-controller@c000000 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic";
- interrupt-controller;
- interrupts-extended = <
- &cpu0-intc 11
- &cpu1-intc 11 &cpu1-intc 9
- &cpu2-intc 11 &cpu2-intc 9
- &cpu3-intc 11 &cpu3-intc 9
- &cpu4-intc 11 &cpu4-intc 9>;
- reg = <0xc000000 0x4000000>;
- riscv,ndev = <10>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
new file mode 100644
index 0000000..b9a61c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Platform-Level Interrupt Controller (PLIC)
+
+description:
+ SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
+ (PLIC) high-level specification in the RISC-V Privileged Architecture
+ specification. The PLIC connects all external interrupts in the system to all
+ hart contexts in the system, via the external interrupt source in each hart.
+
+ A hart context is a privilege mode in a hardware execution thread. For example,
+ in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+ privilege modes per hart; machine mode and supervisor mode.
+
+ Each interrupt can be enabled on per-context basis. Any context can claim
+ a pending enabled interrupt and then release it once it has been handled.
+
+ Each interrupt has a configurable priority. Higher priority interrupts are
+ serviced first. Each context can specify a priority threshold. Interrupts
+ with priority below this threshold will not cause the PLIC to raise its
+ interrupt line leading to the context.
+
+ While the PLIC supports both edge-triggered and level-triggered interrupts,
+ interrupt handlers are oblivious to this distinction and therefore it is not
+ specified in the PLIC device-tree binding.
+
+ While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+ "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
+ contains a specific memory layout, which is documented in chapter 8 of the
+ SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
+
+maintainers:
+ - Sagar Kadam <sagar.kadam@sifive.com>
+ - Paul Walmsley <paul.walmsley@sifive.com>
+ - Palmer Dabbelt <palmer@dabbelt.com>
+
+properties:
+ compatible:
+ items:
+ - const: sifive,fu540-c000-plic
+ - const: sifive,plic-1.0.0
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+ interrupts-extended:
+ minItems: 1
+ description:
+ Specifies which contexts are connected to the PLIC, with "-1" specifying
+ that a context is not present. Each node pointed to should be a
+ riscv,cpu-intc node, which has a riscv node as parent.
+
+ riscv,ndev:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description:
+ Specifies how many external interrupts are supported by this controller.
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+ - reg
+ - interrupts-extended
+ - riscv,ndev
+
+additionalProperties: false
+
+examples:
+ - |
+ plic: interrupt-controller@c000000 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0_intc 11
+ &cpu1_intc 11 &cpu1_intc 9
+ &cpu2_intc 11 &cpu2_intc 9
+ &cpu3_intc 11 &cpu3_intc 9
+ &cpu4_intc 11 &cpu4_intc 9>;
+ reg = <0xc000000 0x4000000>;
+ riscv,ndev = <10>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2020-09-29 17:34    [W:0.652 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site