lkml.org 
[lkml]   [2020]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] dt-bindings: fu540: prci: convert PRCI bindings to json-schema
Date
FU540-C000 SoC from SiFive has a PRCI block, here we convert
the device tree bindings from txt to YAML.

Signed-off-by: Sagar Kadam <sagar.kadam@sifive.com>
---
.../bindings/clock/sifive/fu540-prci.txt | 46 -----------------
.../bindings/clock/sifive/fu540-prci.yaml | 60 ++++++++++++++++++++++
2 files changed, 60 insertions(+), 46 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
create mode 100644 Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml

diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
deleted file mode 100644
index 349808f..0000000
--- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiFive FU540 PRCI bindings
-
-On the FU540 family of SoCs, most system-wide clock and reset integration
-is via the PRCI IP block.
-
-Required properties:
-- compatible: Should be "sifive,<chip>-prci". Only one value is
- supported: "sifive,fu540-c000-prci"
-- reg: Should describe the PRCI's register target physical address region
-- clocks: Should point to the hfclk device tree node and the rtcclk
- device tree node. The RTC clock here is not a time-of-day clock,
- but is instead a high-stability clock source for system timers
- and cycle counters.
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock via the clock ID
-macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
-These macros begin with PRCI_CLK_.
-
-The hfclk and rtcclk nodes are required, and represent physical
-crystals or resonators located on the PCB. These nodes should be present
-underneath /, rather than /soc.
-
-Examples:
-
-/* under /, in PCB-specific DT data */
-hfclk: hfclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <33333333>;
- clock-output-names = "hfclk";
-};
-rtcclk: rtcclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <1000000>;
- clock-output-names = "rtcclk";
-};
-
-/* under /soc, in SoC-specific DT data */
-prci: clock-controller@10000000 {
- compatible = "sifive,fu540-c000-prci";
- reg = <0x0 0x10000000 0x0 0x1000>;
- clocks = <&hfclk>, <&rtcclk>;
- #clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
new file mode 100644
index 0000000..c3be1b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+ - Sagar Kadam <sagar.kadam@sifive.com>
+ - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+ On the FU540 family of SoCs, most system-wide clock and reset integration
+ is via the PRCI IP block.
+ The clock consumer should specify the desired clock via the clock ID
+ macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+ These macros begin with PRCI_CLK_.
+
+ The hfclk and rtcclk nodes are required, and represent physical
+ crystals or resonators located on the PCB. These nodes should be present
+ underneath /, rather than /soc.
+
+properties:
+ compatible:
+ const: sifive,fu540-c000-prci
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: high frequency clock.
+ - description: RTL clock.
+
+ clock-names:
+ items:
+ - const: hfclk
+ - const: rtcclk
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ prci: clock-controller@10000000 {
+ compatible = "sifive,fu540-c000-prci";
+ reg = <0x10000000 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2020-09-29 17:34    [W:0.085 / U:1.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site