lkml.org 
[lkml]   [2020]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] usb: host: ehci-platform: Add workaround for brcm,xgs-iproc-ehci
Date
The ehci controller found in some Broadcom switches with integrated SoCs
has an issue which causes a soft lockup with large transfers like you
see when running ext4 on USB3 flash drive.

Port the fix from the Broadcom XLDK to increase the OUT_THRESHOLD to
avoid the problem.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

I don't have much data on what this change does. I can say it is needed to
avoid a soft lockup when using a USB3 Flash drive formatted has ext4 (USB2 +
ext4 is OK, USB3 + fat is OK). I presume the affected combination ends up using
larger transfers triggering the problem.

The equivalent change in the Broadcom XLDK is

if (IS_ENABLED(CONFIG_USB_EHCI_XGS_IPROC))
ehci_writel(ehci, BCM_USB_FIFO_THRESHOLD,
&ehci->regs->reserved4[6]);

This is problematic because it would unconditionally apply to all ehci
controllers whenever CONFIG_USB_EHCI_XGS_IPROC is enabled (also reserved4 only
goes to 6 so technically it's indexing off the end of the array).

I wasn't sure if I should add a new property or somehow detect the affected
host controller. I settled on using of_device_is_compatible() as that seemed
the simplest thing to do.

Changes in v2:
- move workaround to ehci_platform_reset
- cosmetic changes suggested by Alan

drivers/usb/host/ehci-platform.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 006c4f6188a5..9804ffa9e67f 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -42,6 +42,9 @@
#define EHCI_MAX_CLKS 4
#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)

+#define BCM_USB_FIFO_THRESHOLD 0x00800040
+#define bcm_iproc_insnreg01 hostpc[0]
+
struct ehci_platform_priv {
struct clk *clks[EHCI_MAX_CLKS];
struct reset_control *rsts;
@@ -75,6 +78,11 @@ static int ehci_platform_reset(struct usb_hcd *hcd)

if (pdata->no_io_watchdog)
ehci->need_io_watchdog = 0;
+
+ if (of_device_is_compatible(pdev->dev.of_node, "brcm,xgs-iproc-ehci"))
+ ehci_writel(ehci, BCM_USB_FIFO_THRESHOLD,
+ &ehci->regs->bcm_iproc_insnreg01);
+
return 0;
}

--
2.28.0
\
 
 \ /
  Last update: 2020-09-14 00:00    [W:0.031 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site