lkml.org 
[lkml]   [2020]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v3 0/2] Add Krait Cache Scaling support
Date
This adds Krait Cache scaling support using the cpufreq notifier.
I have some doubt about where this should be actually placed (clk or cpufreq)?
Also the original idea was to create a dedicated cpufreq driver (like it's done in
the codeaurora qcom repo) by copying the cpufreq-dt driver and adding the cache
scaling logic but i still don't know what is better. Have a very similar driver or
add a dedicated driver only for the cache using the cpufreq notifier and do the
scale on every freq transition.
Thanks to everyone who will review or answer these questions.

v3:
* Use opp infrastructure
* Update documentation

v2:
* Fix Documentation error reported by bot
* Rework code to fail probe on missing required params
* Optimize notifier callback to reduce CPU cycle

Ansuel Smith (2):
cpufreq: qcom: Add Krait Cache Scaling support
dt-bindings: cpufreq: Document Krait CPU Cache scaling

.../bindings/cpufreq/krait-cache-scale.yaml | 79 ++++++
drivers/cpufreq/Kconfig.arm | 9 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/krait-cache.c | 232 ++++++++++++++++++
4 files changed, 321 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-cache-scale.yaml
create mode 100644 drivers/cpufreq/krait-cache.c

--
2.27.0

\
 
 \ /
  Last update: 2020-08-21 16:01    [W:0.241 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site