lkml.org 
[lkml]   [2020]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[ANNOUNCE] Reiser5: Selective File Migration - User Interface
Date


Reiser5: selective file migration.
Setting/clearing file "immobile" status


Earlier any migration of data blocks in reiser5 logical volumes
occurred only in the context of some volume balancing procedure, which
actually is a massive migration, aiming to keep fairness of
distribution on the whole logical volume. Typically such migrations
complete some volume operations, e.g. adding a device to a logical
volume, removing a device from a logical volume, increasing data
capacity of a device, flushing a proxy-device, etc).

Now user can perform selective data migration. That is, migrate only
data of some specified regular file to any specified device-component
of the logical volume.

Also, for any specified regular file user can mark it as "immobile",
so that volume balancing procedures will ignore that file.

Finally, for any specified regular file user can clear its "immobile"
status, so that the file will be movable again by volume balancing
procedures.

In particular, using this functionality, user is able to push out
"hot" files on any high-performance device (e.g. proxy device) and pin
them there.

To test the new functionality use reiser4-for-5.7.4.patch of
v5-unstable branch(*) and reiser4progs-2.0.2 (or newer stuff)

(*) https://sourceforge.net/projects/reiser4/files/v5-unstable/


------------------------ File Migration: API -------------------------


/*
* Migrate file to specified target device.
* @fd: file descriptor
* @idx: serial number of target device in the logical volume
*/

/*
* Provide correct path here.
* This header file can be found in reiser4 kernel module, or
* reiser4progs sources
*/
#include "reiser4/ioctl.h"

struct reiser4_vol_op_args args;
memset(&args, 0, sizeof(args));
args.opcode = REISER4_MIGRATE_FILE;
args.val = idx;
result = ioctl(fd, REISER4_IOC_VOLUME, &args);


----------------------------------------------------------------------


COMMENT. After ioctl successful completion the file is not necessarily
written to the target device! To make sure of it, call fsync(2) after
successful ioctl completion, or open the file with O_SYNC flag before
migration.

COMMENT. File migration is a volume operation (like adding, removing a
device to/from a logical volumes), and all volume operations are
serialized. So, any attempt to migrate a file, while performing other
operation on that volume will fail. If some file migration procedure
fails (with EBUSY, or other errors), or was interrupted by user, then
it should be repeated in the current mount session. File migration
procedures interrupted by system crash, hared reset, etc) should be
repeated in the next mount sessions.


------------------ Set file immobile status: API ---------------------


/*
* Set file "immobile".
* @fd: file descriptor
*/

/*
* Provide correct path here.
* This header file can be found in reiser4 kernel module, or
* reiser4progs sources
*/
#include "reiser4/ioctl.h"

struct reiser4_vol_op_args args;
memset(&args, 0, sizeof(args));
args.opcode = REISER4_SET_FILE_IMMOBILE;
result = ioctl(fd, REISER4_IOC_VOLUME, &args);

COMMENT. The immobile status guarantees that any data block of that
file won't migrate to another device-component of the logical volume.
Note, however, that such block can be easily relocated within device
where it currently resides (once the file system finds better location
for that block, etc).


----------------------------------------------------------------------


NOTE: All balancing procedures, which complete device removal, will
ignore "immobile" status of any file. After device removal successful
completion all data blocks of "immobile" files will be relocated to
the remaining devices in accordance with current distribution policy.

NOTE: Any selective file migration described above will ignore
"immobile" status of the file! So the "immobile" status is honored
only by volume balancing procedures, completing some operations such
as adding a device to the logical volume, changing capacity of some
device or flushing a proxy device.


----------------- Clear File immobile status: API --------------------


/*
* Clear file "immobile" status.
* @fd: file descriptor
*/

/*
* Provide correct path here.
* This header file can be found in reiser4 kernel module, or
* reiser4progs sources
*/
#include "reiser4/ioctl.h"

struct reiser4_vol_op_args args;
memset(&args, 0, sizeof(args));
args.opcode = REISER4_CLR_FILE_IMMOBILE;
result = ioctl(fd, REISER4_IOC_VOLUME, &args);


----------------------------------------------------------------------


NOTE: Selective file migration can make your distribution unfair!
Currently it is strongly recommended to migrate files only to devices,
which don't participate in regular data distribution e.g. proxy device

In the future it will be possible to turn off builtin distribution on
any volume. in this case user will be responsible for appointing a
destination device for any file on that volume.


File migration by volume.reiser4 tool


You can use volume.reiser4(8) utility for file migration as well as
for setting/clearing file "immobile" status.

To migrate a regular file just execute

#volume.reiser4 -m N FILENAME

where N is serial number of target device (i.e. device, that the file
is supposed to migrate to), FILENAME is name of the file to migrate.

To set immobile status simply execute

#volume.reiser4 -i FILENAME

To clear immobile status:

#volume.reiser4 -e FILENAME


Holding "hot" files on Proxy Device


It makes sense to relocate data of "hot" files to one, or more
devices, which have the highest performance in the logical volume,
e.g. to proxy device. For this you will need to mark every such file
as "immobile" and move it to the desired device, so that balancing
procedures (including flushing a proxy device) will ignore those
files. See Appendix below for example.


FAQ


Q: How to find out serial number of device /dev/sdc1 in my logical
volume mounted at /mnt

A: Find out total number of devices in your logical volume, executing
"volume.reiser4 /mnt". Then print all volume components by
executing "volume.reiser4 /mnt -p i" in a loop for i = 0,.., N-1,
where N - number of devices in your logical volume. Find out, which
i is corresponding to /dev/sdc1

If you find this too complicated, feel free to send a patch for
more simple procedure of serial number calculation :)


Migration and immobile status of directories (TODO)


Relocation of individual files and marking them as immobile/mobile is
rather expensive operations. If you want all files of some directory
to be stored on the same specified device, it makes sense to mark that
directory by a special way, so that data of all regular files -
children will be automatically dispatched to that device and all
directories - children will inherit the immobile property from the
parent directory. Reiser4 has all needed means for this (so-called
per-inode "heir set").


Appendix


Migrating a file to specified device and pinning it there (examples)


In this example we'll move a file to 1) proxy and 2) regular data
brick and pin it there.

Create ID of logical volume:

# VOL_ID=`uuidgen`

Prepare 2 bricks for our logical volume, /dev/vdc2 for meta-data
brick and /dev/vdc3 for proxy-device:

# DEV1=/dev/vdc2
# DEV2=/dev/vdc3

# mkfs.reiser4 -U $VOL_ID -y -t 256K $DEV1
# mkfs.reiser4 -U $VOL_ID -y -a -t 256K $DEV2

Mount a logical volume consisting of one meta-data brick:

# MNT=/mnt/test
# mount $DEV1 $MNT

Add proxy-device to the logical volume

# volume.reiser4 -x $DEV2 $MNT

Create a 400K file (100 logical blocks) on our logical volume:

# dd if=/dev/zero of=${MNT}/myfile bs=4K count=100
# sync

Print all bricks:

# volume.reiser4 $MNT -p0

Brick Info:
internal ID: 0 (meta-data brick)
external ID: 6ee9927e-04c3-4683-a451-f1329de66222
device name: /dev/vdc2
num replicas: 0
block count: 2621440
blocks used: 116
system blocks: 115
data capacity: 1843119
space usage: 0.000
volinfo addr: 0 (none)
in DSA: Yes
is proxy: No

# volume.reiser4 $MNT -p1

Brick Info:
internal ID: 1 (data brick)
external ID: 2cc41c8a-b3cd-4690-b3fc-bd840e067131
device name: /dev/vdc3
num replicas: 0
block count: 2621440
blocks used: 215
system blocks: 115
data capacity: 2621325
space usage: 0.000
volinfo addr: 0 (none)
in DSA: No
is proxy: Yes

As we can see, the proxy device /dev/vdc3 contains 100
data blocks (blocks used - system blocks) = 215 - 115

Flush proxy device:

# volume.reiser4 -b $MNT

Print all bricks:

# sync
# volume.reiser4 $MNT -p0

Brick Info:
internal ID: 0 (meta-data brick)
external ID: 6ee9927e-04c3-4683-a451-f1329de66222
device name: /dev/vdc2
num replicas: 0
block count: 2621440
blocks used: 216
system blocks: 115
data capacity: 1843119
space usage: 0.000
volinfo addr: 0 (none)
in DSA: Yes
is proxy: No

# volume.reiser4 $MNT -p1

Brick Info:
internal ID: 1 (data brick)
external ID: 2cc41c8a-b3cd-4690-b3fc-bd840e067131
device name: /dev/vdc3
num replicas: 0
block count: 2621440
blocks used: 115
system blocks: 115
data capacity: 2621325
space usage: 0.000
volinfo addr: 0 (none)
in DSA: No
is proxy: Yes

As we can see all 100 data blocks were migrated to the
meta-data brick /dev/vdc2 (block used = system blocks + data blocks +
meta-data blocks = 115 + 100 + 1 = 216)

Mark myfile as immobile and migrate it to the proxy-device:

# volume.reiser4 -i ${MNT}/myfile
# volume.reiser4 -m 1 ${MNT}/myfile

Print all bricks:

# sync
# volume.reiser4 $MNT -p0

Brick Info:
internal ID: 0 (meta-data brick)
external ID: 6ee9927e-04c3-4683-a451-f1329de66222
device name: /dev/vdc2
num replicas: 0
block count: 2621440
blocks used: 116
system blocks: 115
data capacity: 1843119
space usage: 0.000
volinfo addr: 0 (none)
in DSA: Yes
is proxy: No

# volume.reiser4 $MNT -p1

Brick Info:
internal ID: 1 (data brick)
external ID: 2cc41c8a-b3cd-4690-b3fc-bd840e067131
device name: /dev/vdc3
num replicas: 0
block count: 2621440
blocks used: 215
system blocks: 115
data capacity: 2621325
space usage: 0.000
volinfo addr: 0 (none)
in DSA: No
is proxy: Yes

As we can see, the proxy device /dev/vdc3 again contains
all the data blocks. NOTE: file was migrated in spite of
immobile status, because selective migration ignores that
status.

Now flush proxy device and make sure that the file remains
on the proxy device:

# volume.reiser4 -b $MNT

# sync
# volume.reiser4 $MNT -p0
# volume.reiser4 $MNT -p1

As we can see, flushing procedure respects immobile status.

Finally, remove the proxy device from the logical volume:

# volume.reiser4 -r $DEV2 $MNT

Print the single remaining brick of our logical volume:

# volume.reiser4 $MNT -p0

Brick Info:
internal ID: 0 (meta-data brick)
external ID: 6ee9927e-04c3-4683-a451-f1329de66222
device name: /dev/vdc2
num replicas: 0
block count: 2621440
blocks used: 216
system blocks: 115
data capacity: 1843119
space usage: 0.000
volinfo addr: 0 (none)
in DSA: Yes
is proxy: No

As we can see, file was migrated to the remaining brick /dev/vdc2 in
spite of its immobile status. This is because operation of removing a
device ignores that status.

NOTE: the file remains immobile!

Now add /dev/vdc3 as regular device (not proxy) and move the file to
that device:

# volume.reiser4 -a $DEV2 $MNT
# volume.reiser4 -m 1 ${MNT}/myfile

Print info about all bricks:

# sync
# volume.reiser4 $MNT -p0

Brick Info:
internal ID: 0 (meta-data brick)
external ID: 6ee9927e-04c3-4683-a451-f1329de66222
device name: /dev/vdc2
num replicas: 0
block count: 2621440
blocks used: 116
system blocks: 115
data capacity: 1843119
space usage: 0.000
volinfo addr: 0 (none)
in DSA: Yes
is proxy: No

# volume.reiser4 $MNT -p1

Brick Info:
internal ID: 1 (data brick)
external ID: 2cc41c8a-b3cd-4690-b3fc-bd840e067131
device name: /dev/vdc3
num replicas: 0
block count: 2621440
blocks used: 215
system blocks: 115
data capacity: 2621325
space usage: 0.000
volinfo addr: 0 (none)
in DSA: Yes
is proxy: No

As we can see, all data blocks of the file now reside at /dev/vdc3

\
 
 \ /
  Last update: 2020-07-05 13:13    [W:0.077 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site