lkml.org 
[lkml]   [2020]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next 0/2] net: ipa: fix HOLB timer register use
Date
The function ipa_reg_init_hol_block_timer_val() generates the value
to write into the HOL_BLOCK_TIMER endpoint configuration register,
to represent a given timeout value (in microseconds). It only
supports a timer value of 0 though, in part because that's
sufficient, but mainly because there was some confusion about
how the register is formatted in newer hardware.

I got clarification about the register format, so this series fixes
ipa_reg_init_hol_block_timer_val() to work for any supported delay
value.

The delay is based on the IPA core clock, so determining the value
to write for a given period requires access to the current core
clock rate. So the first patch just creates a new function to
provide that.

-Alex

Alex Elder (2):
net: ipa: introduce ipa_clock_rate()
net: ipa: fix HOLB timer calculation

drivers/net/ipa/ipa_clock.c | 6 +++
drivers/net/ipa/ipa_clock.h | 8 ++++
drivers/net/ipa/ipa_endpoint.c | 78 +++++++++++++++++++---------------
3 files changed, 57 insertions(+), 35 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-07-03 23:24    [W:0.061 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site