lkml.org 
[lkml]   [2020]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[ANNOUNCE] v5.6.10-rt5
Dear RT folks!

I'm pleased to announce the v5.6.10-rt5 patch set.

Changes since v5.6.10-rt4:

- Jiri Kosina reported that the IRQ's core spurious detector disables
8250's interrupt line under high load on qemu/KVM. The root cause
is that qemu process quite fast and issues the edge interrupt more
often than actual hardware. The threaded interrupt runs longer
because the RT patch increased the number of iterations of the
handler for a reason which has been resolved in the meantime.
It appears to the core that the IRQ is left unhandled because the
primary handler fires constantly and the threaded handler appears to
make no progress. To minimize the issue the loop-count is decreased
to what upstream has.

- A patch by Liwei Song to suppress a warning from the memory allocator
during suspend-to-ram and not enable interrupts.

- On kmem's cache destruction, the cache structure could be used after
its destruction. Patch by Kevin Hao.

Known issues
- It has been pointed out that due to changes to the printk code the
internal buffer representation changed. This is only an issue if tools
like `crash' are used to extract the printk buffer from a kernel memory
image.

The delta patch against v5.6.10-rt4 is appended below and can be found here:

https://cdn.kernel.org/pub/linux/kernel/projects/rt/5.6/incr/patch-5.6.10-rt4-rt5.patch.xz

You can get this release via the git tree at:

git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git v5.6.10-rt5

The RT patch against v5.6.10 can be found here:

https://cdn.kernel.org/pub/linux/kernel/projects/rt/5.6/older/patch-5.6.10-rt5.patch.xz

The split quilt queue is available at:

https://cdn.kernel.org/pub/linux/kernel/projects/rt/5.6/older/patches-5.6.10-rt5.tar.xz

Sebastian

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 15d7c47fb7ca3..475b51f4321db 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -55,16 +55,7 @@ static struct uart_driver serial8250_reg;

static unsigned int skip_txen_test; /* force skip of txen test at init time */

-/*
- * On -rt we can have a more delays, and legitimately
- * so - so don't drop work spuriously and spam the
- * syslog:
- */
-#ifdef CONFIG_PREEMPT_RT
-# define PASS_LIMIT 1000000
-#else
-# define PASS_LIMIT 512
-#endif
+#define PASS_LIMIT 512

#include <asm/serial.h>
/*
diff --git a/localversion-rt b/localversion-rt
index ad3da1bcab7e8..0efe7ba1930e1 100644
--- a/localversion-rt
+++ b/localversion-rt
@@ -1 +1 @@
--rt4
+-rt5
diff --git a/mm/slub.c b/mm/slub.c
index 15c194ff16e6e..9ec40d561b68c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1655,7 +1655,7 @@ static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node)
enableirqs = true;

#ifdef CONFIG_PREEMPT_RT
- if (system_state > SYSTEM_BOOTING)
+ if (system_state > SYSTEM_BOOTING && system_state < SYSTEM_SUSPEND)
enableirqs = true;
#endif
if (enableirqs)
@@ -2402,9 +2402,6 @@ static void flush_all(struct kmem_cache *s)
for_each_online_cpu(cpu) {
struct slub_free_list *f;

- if (!has_cpu_slab(cpu, s))
- continue;
-
f = &per_cpu(slub_free_list, cpu);
raw_spin_lock_irq(&f->lock);
list_splice_init(&f->list, &tofree);
@@ -2771,7 +2768,8 @@ static __always_inline void *slab_alloc_node(struct kmem_cache *s,
unsigned long tid;

if (IS_ENABLED(CONFIG_PREEMPT_RT) && IS_ENABLED(CONFIG_DEBUG_ATOMIC_SLEEP))
- WARN_ON_ONCE(!preemptible() && system_state >= SYSTEM_SCHEDULING);
+ WARN_ON_ONCE(!preemptible() &&
+ (system_state > SYSTEM_BOOTING && system_state < SYSTEM_SUSPEND));

s = slab_pre_alloc_hook(s, gfpflags);
if (!s)
@@ -3236,7 +3234,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
int i;

if (IS_ENABLED(CONFIG_PREEMPT_RT) && IS_ENABLED(CONFIG_DEBUG_ATOMIC_SLEEP))
- WARN_ON_ONCE(!preemptible() && system_state >= SYSTEM_SCHEDULING);
+ WARN_ON_ONCE(!preemptible() &&
+ (system_state > SYSTEM_BOOTING && system_state < SYSTEM_SUSPEND));

/* memcg and kmem_cache debug support */
s = slab_pre_alloc_hook(s, flags);
\
 
 \ /
  Last update: 2020-05-04 22:05    [W:0.042 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site