lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon (pmbus/max20730): add max20710 and debugfs access support
Date
This change has 2 parts:
1. Add support for max20710 into the existing max20730 driver.

2. Add debugfs interface support for accessing device specific registers
(MFR_VOUT_MIN, MFR_DEVSET1 and MFR_DEVSET2) and others
including OPERATION, ON_OFF_CONFIG, SMB_ALERT_MASK,
VOUT_MODE, VOUT_COMMAND and VOUT_MAX.

Signed-off-by: Ugur Usug <ugur.usug@maximintegrated.com>
---
Documentation/hwmon/max20730.rst | 10 +-
drivers/hwmon/pmbus/Kconfig | 4 +-
drivers/hwmon/pmbus/max20730.c | 412 ++++++++++++++++++++++++++++++++++++++-
3 files changed, 414 insertions(+), 12 deletions(-)
mode change 100644 => 100755 drivers/hwmon/pmbus/max20730.c

diff --git a/Documentation/hwmon/max20730.rst b/Documentation/hwmon/max20730.rst
index cea7ae5..cb0c95b 100644
--- a/Documentation/hwmon/max20730.rst
+++ b/Documentation/hwmon/max20730.rst
@@ -5,6 +5,14 @@ Kernel driver max20730

Supported chips:

+ * Maxim MAX20710
+
+ Prefix: 'max20710'
+
+ Addresses scanned: -
+
+ Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf
+
* Maxim MAX20730

Prefix: 'max20730'
@@ -35,7 +43,7 @@ Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------

-This driver implements support for Maxim MAX20730, MAX20734, and MAX20743
+This driver implements support for Maxim MAX20710, MAX20730, MAX20734, and MAX20743
Integrated, Step-Down Switching Regulators with PMBus support.

The driver is a client driver to the core PMBus driver.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index de12a56..cac96e0 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -147,10 +147,10 @@ config SENSORS_MAX16064
be called max16064.

config SENSORS_MAX20730
- tristate "Maxim MAX20730, MAX20734, MAX20743"
+ tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743"
help
If you say yes here you get hardware monitoring support for Maxim
- MAX20730, MAX20734, and MAX20743.
+ MAX20710, MAX20730, MAX20734, and MAX20743.

This driver can also be built as a module. If so, the module will
be called max20730.
diff --git a/drivers/hwmon/pmbus/max20730.c b/drivers/hwmon/pmbus/max20730.c
old mode 100644
new mode 100755
index c0bb054..fc38be0
--- a/drivers/hwmon/pmbus/max20730.c
+++ b/drivers/hwmon/pmbus/max20730.c
@@ -1,12 +1,14 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * Driver for MAX20730, MAX20734, and MAX20743 Integrated, Step-Down
- * Switching Regulators
+ * Driver for MAX20710, MAX20730, MAX20734, and MAX20743 Integrated,
+ * Step-Down Switching Regulators
*
* Copyright 2019 Google LLC.
+ * Copyright 2020 Maxim Integrated
*/

#include <linux/bits.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -19,21 +21,283 @@
#include "pmbus.h"

enum chips {
+ max20710,
max20730,
max20734,
max20743
};

+enum {
+ MAX20730_DEBUGFS_VOUT_MIN = 0,
+ MAX20730_DEBUGFS_FREQUENCY,
+ MAX20730_DEBUGFS_PG_DELAY,
+ MAX20730_DEBUGFS_INTERNAL_GAIN,
+ MAX20730_DEBUGFS_BOOT_VOLTAGE,
+ MAX20730_DEBUGFS_OUT_V_RAMP_RATE,
+ MAX20730_DEBUGFS_OC_PROTECT_MODE,
+ MAX20730_DEBUGFS_SS_TIMING,
+ MAX20730_DEBUGFS_IMAX,
+ MAX20730_DEBUGFS_OPERATION,
+ MAX20730_DEBUGFS_ON_OFF_CONFIG,
+ MAX20730_DEBUGFS_SMBALERT_MASK,
+ MAX20730_DEBUGFS_VOUT_MODE,
+ MAX20730_DEBUGFS_VOUT_COMMAND,
+ MAX20730_DEBUGFS_VOUT_MAX,
+ MAX20730_DEBUGFS_NUM_ENTRIES
+};
+
struct max20730_data {
enum chips id;
struct pmbus_driver_info info;
struct mutex lock; /* Used to protect against parallel writes */
u16 mfr_devset1;
+ u16 mfr_devset2;
+ u16 mfr_voutmin;
};

#define to_max20730_data(x) container_of(x, struct max20730_data, info)

+#define PMBUS_SMB_ALERT_MASK 0x1B
+
+#define MAX20730_MFR_VOUT_MIN 0xd1
#define MAX20730_MFR_DEVSET1 0xd2
+#define MAX20730_MFR_DEVSET2 0xd3
+
+#define MAX20730_MFR_VOUT_MIN_MASK GENMASK(9, 0)
+#define MAX20730_MFR_VOUT_MIN_BIT_POS 0
+
+#define MAX20730_MFR_DEVSET1_RGAIN_MASK (BIT(13) | BIT(14))
+#define MAX20730_MFR_DEVSET1_OTP_MASK (BIT(11) | BIT(12))
+#define MAX20730_MFR_DEVSET1_VBOOT_MASK (BIT(8) | BIT(9))
+#define MAX20730_MFR_DEVSET1_OCP_MASK (BIT(5) | BIT(6))
+#define MAX20730_MFR_DEVSET1_FSW_MASK GENMASK(4, 2)
+#define MAX20730_MFR_DEVSET1_TSTAT_MASK (BIT(0) | BIT(1))
+
+#define MAX20730_MFR_DEVSET1_RGAIN_BIT_POS 13
+#define MAX20730_MFR_DEVSET1_OTP_BIT_POS 11
+#define MAX20730_MFR_DEVSET1_VBOOT_BIT_POS 8
+#define MAX20730_MFR_DEVSET1_OCP_BIT_POS 5
+#define MAX20730_MFR_DEVSET1_FSW_BIT_POS 2
+#define MAX20730_MFR_DEVSET1_TSTAT_BIT_POS 0
+
+#define MAX20730_MFR_DEVSET2_IMAX_MASK GENMASK(10, 8)
+#define MAX20730_MFR_DEVSET2_VRATE (BIT(6) | BIT(7))
+#define MAX20730_MFR_DEVSET2_OCPM_MASK BIT(5)
+#define MAX20730_MFR_DEVSET2_SS_MASK (BIT(0) | BIT(1))
+
+#define MAX20730_MFR_DEVSET2_IMAX_BIT_POS 8
+#define MAX20730_MFR_DEVSET2_VRATE_BIT_POS 6
+#define MAX20730_MFR_DEVSET2_OCPM_BIT_POS 5
+#define MAX20730_MFR_DEVSET2_SS_BIT_POS 0
+
+#define DEBUG_FS_DATA_MAX 8
+
+struct max20730_debugfs_data {
+ struct i2c_client *client;
+ int debugfs_entries[MAX20730_DEBUGFS_NUM_ENTRIES];
+};
+
+#define to_psu(x, y) container_of((x), \
+ struct max20730_debugfs_data, debugfs_entries[(y)])
+
+static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int ret, len;
+ int *idxp = file->private_data;
+ int idx = *idxp;
+ struct max20730_debugfs_data *psu = to_psu(idxp, idx);
+ const struct pmbus_driver_info *info;
+ const struct max20730_data *data;
+ char tbuf[DEBUG_FS_DATA_MAX + 2] = { 0 };
+ u16 val;
+
+ info = pmbus_get_driver_info(psu->client);
+ data = to_max20730_data(info);
+
+ switch (idx) {
+ case MAX20730_DEBUGFS_VOUT_MIN:
+ len = snprintf(tbuf, 5, "%d", data->mfr_voutmin);
+ break;
+ case MAX20730_DEBUGFS_FREQUENCY:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_FSW_MASK)
+ >> MAX20730_MFR_DEVSET1_FSW_BIT_POS;
+ if (val == 0)
+ ret = 400;
+ else if (val == 1)
+ ret = 500;
+ else if (val == 2 || val == 3)
+ ret = 600;
+ else if (val == 4)
+ ret = 700;
+ else if (val == 5)
+ ret = 800;
+ else
+ ret = 900;
+ len = snprintf(tbuf, 4, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_PG_DELAY:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_TSTAT_MASK)
+ >> MAX20730_MFR_DEVSET1_TSTAT_BIT_POS;
+
+ if (val == 0)
+ strcpy(tbuf, "2000");
+ else if (val == 1)
+ strcpy(tbuf, "125");
+ else if (val == 2)
+ strcpy(tbuf, "62.5");
+ else
+ strcpy(tbuf, "32");
+ len = strnlen(tbuf, DEBUG_FS_DATA_MAX);
+ break;
+
+ case MAX20730_DEBUGFS_INTERNAL_GAIN:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_RGAIN_MASK)
+ >> MAX20730_MFR_DEVSET1_RGAIN_BIT_POS;
+
+ if (data->id == max20734) {
+ /* AN6209 */
+ if (val == 0)
+ strcpy(tbuf, "0.8");
+ else if (val == 1)
+ strcpy(tbuf, "3.2");
+ else if (val == 2)
+ strcpy(tbuf, "1.6");
+ else
+ strcpy(tbuf, "6.4");
+ } else if (data->id == max20730 || data->id == max20710) {
+ /* AN6042 or AN6140 */
+ if (val == 0)
+ strcpy(tbuf, "0.9");
+ else if (val == 1)
+ strcpy(tbuf, "3.6");
+ else if (val == 2)
+ strcpy(tbuf, "1.8");
+ else
+ strcpy(tbuf, "7.2");
+ } else if (data->id == max20743) {
+ /* AN6042 */
+ if (val == 0)
+ strcpy(tbuf, "0.45");
+ else if (val == 1)
+ strcpy(tbuf, "1.8");
+ else if (val == 2)
+ strcpy(tbuf, "0.9");
+ else
+ strcpy(tbuf, "3.6");
+ } else
+ return -EINVAL;
+
+ len = strnlen(tbuf, DEBUG_FS_DATA_MAX);
+ break;
+ case MAX20730_DEBUGFS_BOOT_VOLTAGE:
+ val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_VBOOT_MASK)
+ >> MAX20730_MFR_DEVSET1_VBOOT_BIT_POS;
+
+ if (val == 0)
+ strcpy(tbuf, "0.6484");
+ else if (val == 1)
+ strcpy(tbuf, "0.8984");
+ else if (val == 2)
+ strcpy(tbuf, "1.0");
+ else
+ return -EINVAL;
+
+ len = strnlen(tbuf, DEBUG_FS_DATA_MAX);
+ break;
+ case MAX20730_DEBUGFS_OUT_V_RAMP_RATE:
+ val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_VRATE)
+ >> MAX20730_MFR_DEVSET2_VRATE_BIT_POS;
+
+ if (val == 0)
+ ret = 4;
+ else if (val == 1)
+ ret = 2;
+ else if (val == 2)
+ ret = 1;
+ else
+ return -EINVAL;
+
+ len = snprintf(tbuf, 2, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_OC_PROTECT_MODE:
+ ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_OCPM_MASK)
+ >> MAX20730_MFR_DEVSET2_OCPM_BIT_POS;
+ len = snprintf(tbuf, 2, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_SS_TIMING:
+ val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_SS_MASK)
+ >> MAX20730_MFR_DEVSET2_SS_BIT_POS;
+
+ if (val == 0)
+ strcpy(tbuf, "0.75");
+ else if (val == 1)
+ strcpy(tbuf, "1.5");
+ else if (val == 2)
+ strcpy(tbuf, "3");
+ else
+ strcpy(tbuf, "6");
+
+ len = strnlen(tbuf, DEBUG_FS_DATA_MAX);
+ break;
+ case MAX20730_DEBUGFS_IMAX:
+ ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_IMAX_MASK)
+ >> MAX20730_MFR_DEVSET2_IMAX_BIT_POS;
+ len = snprintf(tbuf, 2, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_OPERATION:
+ ret = i2c_smbus_read_byte_data(psu->client, PMBUS_OPERATION);
+ if(ret < 0)
+ return ret;
+ len = snprintf(tbuf, 2, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_ON_OFF_CONFIG:
+ ret = i2c_smbus_read_byte_data(psu->client, PMBUS_ON_OFF_CONFIG);
+ if(ret < 0)
+ return ret;
+ len = snprintf(tbuf, 2, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_SMBALERT_MASK:
+ ret = i2c_smbus_read_word_data(psu->client,
+ PMBUS_SMB_ALERT_MASK);
+ if(ret < 0)
+ return ret;
+ len = snprintf(tbuf, 3, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_VOUT_MODE:
+ ret = i2c_smbus_read_byte_data(psu->client, PMBUS_VOUT_MODE);
+ if(ret < 0)
+ return ret;
+ len = snprintf(tbuf, 2, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_VOUT_COMMAND:
+ ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_COMMAND);
+ if(ret < 0)
+ return ret;
+ len = snprintf(tbuf, 3, "%d", ret);
+ break;
+ case MAX20730_DEBUGFS_VOUT_MAX:
+ ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_MAX);
+ if(ret < 0)
+ return ret;
+ len = snprintf(tbuf, 3, "%d", ret);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ tbuf[len] = '\n';
+ len += 2;
+
+ return simple_read_from_buffer(buf, count, ppos, tbuf, len);
+}
+
+static const struct file_operations max20730_fops = {
+ .llseek = noop_llseek,
+ .read = max20730_debugfs_read,
+ .write = NULL,
+ .open = simple_open,
+};

/*
* Convert discreet value to direct data format. Strictly speaking, all passed
@@ -80,6 +344,7 @@ static long direct_to_val(u16 w, enum pmbus_sensor_classes class,
}

static u32 max_current[][5] = {
+ [max20710] = { 6200, 8000, 9700, 11600 },
[max20730] = { 13000, 16600, 20100, 23600 },
[max20734] = { 21000, 27000, 32000, 38000 },
[max20743] = { 18900, 24100, 29200, 34100 },
@@ -164,6 +429,45 @@ static int max20730_write_word_data(struct i2c_client *client, int page,
}

static const struct pmbus_driver_info max20730_info[] = {
+ [max20710] = {
+ .pages = 1,
+ .read_word_data = max20730_read_word_data,
+ .write_word_data = max20730_write_word_data,
+
+ /* Source : Maxim AN6140 and AN6042 */
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_TEMPERATURE] = 21,
+ .b[PSC_TEMPERATURE] = 5887,
+ .R[PSC_TEMPERATURE] = -1,
+
+ .format[PSC_VOLTAGE_IN] = direct,
+ .m[PSC_VOLTAGE_IN] = 3609,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -2,
+
+ /*
+ * Values in the datasheet are adjusted for temperature and
+ * for the relationship between Vin and Vout.
+ * Unfortunately, the data sheet suggests that Vout measurement
+ * may be scaled with a resistor array. This is indeed the case
+ * at least on the evaulation boards. As a result, any in-driver
+ * adjustments would either be wrong or require elaborate means
+ * to configure the scaling. Instead of doing that, just report
+ * raw values and let userspace handle adjustments.
+ */
+ .format[PSC_CURRENT_OUT] = direct,
+ .m[PSC_CURRENT_OUT] = 153,
+ .b[PSC_CURRENT_OUT] = 4976,
+ .R[PSC_CURRENT_OUT] = -1,
+
+ .format[PSC_VOLTAGE_OUT] = linear,
+
+ .func[0] = PMBUS_HAVE_VIN |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_STATUS_INPUT,
+ },
[max20730] = {
.pages = 1,
.read_word_data = max20730_read_word_data,
@@ -200,7 +504,8 @@ static const struct pmbus_driver_info max20730_info[] = {
.func[0] = PMBUS_HAVE_VIN |
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
- PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_STATUS_INPUT,
},
[max20734] = {
.pages = 1,
@@ -228,7 +533,8 @@ static const struct pmbus_driver_info max20730_info[] = {
.func[0] = PMBUS_HAVE_VIN |
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
- PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_STATUS_INPUT,
},
[max20743] = {
.pages = 1,
@@ -256,7 +562,8 @@ static const struct pmbus_driver_info max20730_info[] = {
.func[0] = PMBUS_HAVE_VIN |
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
- PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_STATUS_INPUT,
},
};

@@ -267,14 +574,17 @@ static int max20730_probe(struct i2c_client *client,
u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
struct max20730_data *data;
enum chips chip_id;
- int ret;
+ int i, ret;
+ struct dentry *debugfs;
+ struct dentry *max20730_dir;
+ struct max20730_debugfs_data *psu;

if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA |
I2C_FUNC_SMBUS_READ_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA))
return -ENODEV;
-
+
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
if (ret < 0) {
dev_err(&client->dev, "Failed to read Manufacturer ID\n");
@@ -335,10 +645,93 @@ static int max20730_probe(struct i2c_client *client,
return ret;
data->mfr_devset1 = ret;

- return pmbus_do_probe(client, id, &data->info);
+ ret = pmbus_do_probe(client, id, &data->info);
+ if (ret < 0)
+ return ret;
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+ ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET2);
+ if (ret < 0)
+ return ret;
+ data->mfr_devset2 = ret;
+
+ ret = i2c_smbus_read_word_data(client, MAX20730_MFR_VOUT_MIN);
+ if (ret < 0)
+ return ret;
+ data->mfr_voutmin = ret;
+
+ /*
+ * Don't fail the probe if there isn't enough memory for debugfs.
+ */
+ psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+ if (!psu)
+ return 0;
+ psu->client = client;
+
+ /* Don't fail the probe if we can't create debugfs */
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return 0;
+
+ max20730_dir = debugfs_create_dir(client->name, debugfs);
+ if (!max20730_dir)
+ return 0;
+
+ for (i = 0; i < MAX20730_DEBUGFS_NUM_ENTRIES; ++i)
+ psu->debugfs_entries[i] = i;
+
+ debugfs_create_file("vout_min", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MIN],
+ &max20730_fops);
+ debugfs_create_file("frequency", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_FREQUENCY],
+ &max20730_fops);
+ debugfs_create_file("power_good_delay", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_PG_DELAY],
+ &max20730_fops);
+ debugfs_create_file("internal_gain", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_INTERNAL_GAIN],
+ &max20730_fops);
+ debugfs_create_file("boot_voltage", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_BOOT_VOLTAGE],
+ &max20730_fops);
+ debugfs_create_file("out_voltage_ramp_rate", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_OUT_V_RAMP_RATE],
+ &max20730_fops);
+ debugfs_create_file("oc_protection_mode", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_OC_PROTECT_MODE],
+ &max20730_fops);
+ debugfs_create_file("soft_start_timing", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_SS_TIMING],
+ &max20730_fops);
+ debugfs_create_file("imax", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_IMAX],
+ &max20730_fops);
+ debugfs_create_file("operation", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_OPERATION],
+ &max20730_fops);
+ debugfs_create_file("on_off_config", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_ON_OFF_CONFIG],
+ &max20730_fops);
+ debugfs_create_file("smbalert_mask", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_SMBALERT_MASK],
+ &max20730_fops);
+ debugfs_create_file("vout_mode", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MODE],
+ &max20730_fops);
+ debugfs_create_file("vout_command", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_COMMAND],
+ &max20730_fops);
+ debugfs_create_file("vout_max", 0444, max20730_dir,
+ &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MAX],
+ &max20730_fops);
+#endif
+
+ return 0;
}

static const struct i2c_device_id max20730_id[] = {
+ { "max20710", max20710 },
{ "max20730", max20730 },
{ "max20734", max20734 },
{ "max20743", max20743 },
@@ -348,6 +741,7 @@ static const struct i2c_device_id max20730_id[] = {
MODULE_DEVICE_TABLE(i2c, max20730_id);

static const struct of_device_id max20730_of_match[] = {
+ { .compatible = "maxim,max20710", .data = (void *)max20710 },
{ .compatible = "maxim,max20730", .data = (void *)max20730 },
{ .compatible = "maxim,max20734", .data = (void *)max20734 },
{ .compatible = "maxim,max20743", .data = (void *)max20743 },
@@ -369,5 +763,5 @@ static struct i2c_driver max20730_driver = {
module_i2c_driver(max20730_driver);

MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("PMBus driver for Maxim MAX20730 / MAX20734 / MAX20743");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX20710 / MAX20730 / MAX20734 / MAX20743");
MODULE_LICENSE("GPL");
--
2.7.4
\
 
 \ /
  Last update: 2020-05-26 11:42    [W:0.055 / U:1.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site