lkml.org 
[lkml]   [2020]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: usb: dwc2: add power-domains property
Date
A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index fb2f62aef..9352a8ef6 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -78,6 +78,9 @@ properties:
phy-names:
const: usb2-phy

+ power-domains:
+ maxItems: 1
+
vbus-supply:
description: reference to the VBUS regulator. Depending on the current mode
this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
--
2.11.0
\
 
 \ /
  Last update: 2020-04-25 19:08    [W:0.027 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site