lkml.org 
[lkml]   [2020]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/6] thermal: hwmon: Replace the call the thermal_cdev_update()
From
Date
On 4/10/20 3:12 PM, Daniel Lezcano wrote:
> The function thermal_cdev_upadte is called from the throttling

misspelled

> functions in the governors not from the cooling device itself.
>
> The cooling device is set to its maximum state and then updated. Even
> if I don't get the purpose of probing the pwm-fan to its maximum
> cooling state, we can replace the thermal_cdev_update() call to the
> internal set_cur_state() function directly.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
> drivers/hwmon/pwm-fan.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> index 30b7b3ea8836..a654ecdf21ab 100644
> --- a/drivers/hwmon/pwm-fan.c
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -372,7 +372,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - ctx->pwm_fan_state = ctx->pwm_fan_max_state;
> if (IS_ENABLED(CONFIG_THERMAL)) {
> cdev = devm_thermal_of_cooling_device_register(dev,
> dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops);
> @@ -384,7 +383,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
> return ret;
> }
> ctx->cdev = cdev;
> - thermal_cdev_update(cdev);
> + pwm_fan_set_cur_state(cdev, ctx->pwm_fan_max_state);

So far the function would only change the state if the new
state is not equal to the old state. This was the case because
pwm_fan_state was set to pwm_fan_max_state, and the call to
thermal_cdev_update() and thus pwm_fan_set_cur_state() would
do nothing except update statistics. The old code _assumed_
that the current state is pwm_fan_max_state. The new code
enforces it. That is a substantial semantic change, and it
is not really reflected in the commit message. Is that really
what you want ? If so, the commit message needs to state that
and explain the rationale.

Thanks,
Guenter

> }
>
> return 0;
>

\
 
 \ /
  Last update: 2020-04-11 03:33    [W:0.083 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site