lkml.org 
[lkml]   [2020]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] thermal: hwmon: Replace the call the thermal_cdev_update()
Date
The function thermal_cdev_upadte is called from the throttling
functions in the governors not from the cooling device itself.

The cooling device is set to its maximum state and then updated. Even
if I don't get the purpose of probing the pwm-fan to its maximum
cooling state, we can replace the thermal_cdev_update() call to the
internal set_cur_state() function directly.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/hwmon/pwm-fan.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 30b7b3ea8836..a654ecdf21ab 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -372,7 +372,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
if (ret)
return ret;

- ctx->pwm_fan_state = ctx->pwm_fan_max_state;
if (IS_ENABLED(CONFIG_THERMAL)) {
cdev = devm_thermal_of_cooling_device_register(dev,
dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops);
@@ -384,7 +383,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
return ret;
}
ctx->cdev = cdev;
- thermal_cdev_update(cdev);
+ pwm_fan_set_cur_state(cdev, ctx->pwm_fan_max_state);
}

return 0;
--
2.17.1
\
 
 \ /
  Last update: 2020-04-11 00:13    [W:0.108 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site