Messages in this thread | | | From | "H. Nikolaus Schaller" <> | Subject | [RFC v3 0/8] MIPS: CI20: add HDMI out support | Date | Sun, 29 Mar 2020 19:35:46 +0200 |
| |
+++ help is needed: driver is not completely working and shows no output signal on the HDMI data and clock lanes +++ HPD is working and /dev/fb0 does appear +++ but there is no trigger to initialize the lcdc
* add definition for second jz4780-lcdc * diverse fixes for yaml schema * make ingenic-drm driver compatible to ingenic,jz4780-lcd * converted existing ingenic,lcd.txt to ingenic,lcd.yaml - suggested by Paul Cercueil <paul@crapouillou.net> * removed blank line before MODULE_DEVICE_TABLE() macro - Paul Cercueil <paul@crapouillou.net> * added some missing Signed-off: * removed Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> from the recipients list and Cc: since the address is no longer available. * removed "pinctrl: ingenic: add hdmi-ddc pin control group" from this patch series since it is already applied elsewhere (by Linus Walleij <linus.walleij@linaro.org>)
RFC V2 2020-02-28 19:19:40: * Converted .txt bindings to .yaml (by Sam Ravnborg <sam@ravnborg.org> - big THANKS)
RFC V1 2020-02-26 20:13:06: This patch series adds HDMI output to the jz4780/CI20 board.
It is based on taking the old 3.18 vendor kernel as well as an earlier submission from 2015: https://lore.kernel.org/patchwork/patch/547872/ and trying to achieve the same with modern DTS setup and new/modified drivers.
Unfortunately, in this first RFC, only EDID and creation of /dev/fb0 are working. Also, HDMI hot plugging is detected.
But there is no HDMI output signal. So some tiny piece seems to be missing to enable/configure the Synposys HDMI controller.
We need help from the community to fix this.
Original authors of most patches are * Paul Boddie <paul@boddie.org.uk> * Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
H. Nikolaus Schaller (4): dt-bindings: display: convert ingenic,lcd.txt to ingenic,lcd.yaml drm: ingenic-drm: add MODULE_DEVICE_TABLE drm: ingenic-drm: add support for ingenic,jz4780-lcd MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780
Paul Boddie (3): drm: ingenic: add jz4780 Synopsys HDMI driver MIPS: DTS: jz4780: account for Synopsys HDMI driver and LCD controller MIPS: DTS: CI20: add HDMI setup
Sam Ravnborg (1): dt-bindings: display: add ingenic-jz4780-hdmi DT Schema
.../bindings/display/ingenic,lcd.txt | 45 ------ .../bindings/display/ingenic,lcd.yaml | 128 ++++++++++++++++++ .../bindings/display/ingenic-jz4780-hdmi.yaml | 82 +++++++++++ arch/mips/boot/dts/ingenic/ci20.dts | 64 +++++++++ arch/mips/boot/dts/ingenic/jz4780.dtsi | 46 +++++++ arch/mips/configs/ci20_defconfig | 3 + drivers/gpu/drm/ingenic/Kconfig | 8 ++ drivers/gpu/drm/ingenic/Makefile | 1 + drivers/gpu/drm/ingenic/dw_hdmi-jz4780.c | 120 ++++++++++++++++ drivers/gpu/drm/ingenic/ingenic-drm.c | 8 ++ 10 files changed, 460 insertions(+), 45 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.txt create mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.yaml create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml create mode 100644 drivers/gpu/drm/ingenic/dw_hdmi-jz4780.c
-- 2.25.1
| |