lkml.org 
[lkml]   [2020]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: bcm283x: Add cells encoding format to firmware bus
Date
With the introduction of 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's
firmware bus DMA limitations") the firmware bus has to comply with
/soc's DMA limitations. Ultimately linking both buses to a same
dma-ranges property. The patch (and author) missed the fact that a bus'
#address-cells and #size-cells properties are not inherited, but set to
a fixed value which, in this case, doesn't match /soc's. This, although
not breaking Linux's DMA mapping functionality, generates ugly dtc
warnings.

Fix the issue by adding the correct address and size cells properties
under the firmware bus.

Fixes: 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index fd2c766e0f71..f7ae5a4530b8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -14,6 +14,9 @@ act {
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
mboxes = <&mailbox>;
dma-ranges;
};
--
2.25.1
\
 
 \ /
  Last update: 2020-03-26 14:44    [W:0.049 / U:6.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site