lkml.org 
[lkml]   [2020]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] media: vimc: deb: Add support for GBR and BGR bus formats on source pad
From
Date
Hi Nicolas,

Thanks for the patch.

On 2/2/20 1:50 PM, Nícolas F. R. A. Prado wrote:
> Add support for GBR and BGR media bus formats for the source pad of
> debayer subdevices.
>
> Co-developed-by: Vitor Massaru Iha <vitor@massaru.org>
> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
> ---
> drivers/media/platform/vimc/vimc-debayer.c | 53 +++++++++++++++++-----
> 1 file changed, 41 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
> index 5d1b67d684bb..463cafbe107e 100644
> --- a/drivers/media/platform/vimc/vimc-debayer.c
> +++ b/drivers/media/platform/vimc/vimc-debayer.c
> @@ -51,6 +51,11 @@ static const struct v4l2_mbus_framefmt sink_fmt_default = {
> .colorspace = V4L2_COLORSPACE_DEFAULT,
> };
>
> +static const u32 src_rgb_codes[] = {

s/src_rgb_codes/vimc_deb_src_mbus_codes

> + MEDIA_BUS_FMT_BGR888_1X24,
> + MEDIA_BUS_FMT_RGB888_1X24,
> + MEDIA_BUS_FMT_GBR888_1X24};

The closing bracket should be in the next line.

I was also wondering if all the MEDIA_BUS_FMT_BGR888_* MEDIA_BUS_FMT_RGB888_*
MEDIA_BUS_FMT_GBR888_* variants could be added here as well.

> +
> static const struct vimc_deb_pix_map vimc_deb_pix_map_list[] = {
> {
> .code = MEDIA_BUS_FMT_SBGGR8_1X8,
> @@ -148,14 +153,11 @@ static int vimc_deb_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> - /* We only support one format for source pads */
> if (VIMC_IS_SRC(code->pad)) {
> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
> -
> - if (code->index)
> + if (code->index >= ARRAY_SIZE(src_rgb_codes))
> return -EINVAL;
>
> - code->code = vdeb->src_code;
> + code->code = src_rgb_codes[code->index];
> } else {
> if (code->index >= ARRAY_SIZE(vimc_deb_pix_map_list))
> return -EINVAL;
> @@ -170,7 +172,7 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_frame_size_enum *fse)
> {
> - struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
> + int i;

unsigned

>
> if (fse->index)
> return -EINVAL;
> @@ -181,8 +183,13 @@ static int vimc_deb_enum_frame_size(struct v4l2_subdev *sd,
>
> if (!vpix)
> return -EINVAL;
> - } else if (fse->code != vdeb->src_code) {
> - return -EINVAL;
> + } else {

You can declare i inside this else statement.

> + for (i = 0; i < ARRAY_SIZE(src_rgb_codes); i++) {
> + if (src_rgb_codes[i] == fse->code)
> + break;
> + }
> + if (i == ARRAY_SIZE(src_rgb_codes))
> + return -EINVAL;
> }
>
> fse->min_width = VIMC_FRAME_MIN_WIDTH;
> @@ -237,6 +244,8 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
> {
> struct vimc_deb_device *vdeb = v4l2_get_subdevdata(sd);
> struct v4l2_mbus_framefmt *sink_fmt;
> + unsigned int i;
> + u32 *src_code;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> /* Do not change the format while stream is on */
> @@ -244,8 +253,10 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
> return -EBUSY;
>
> sink_fmt = &vdeb->sink_fmt;
> + src_code = &vdeb->src_code;
> } else {
> sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
> + src_code = &v4l2_subdev_get_try_format(sd, cfg, 1)->code;
> }
>
> /*
> @@ -253,9 +264,17 @@ static int vimc_deb_set_fmt(struct v4l2_subdev *sd,
> * it is propagated from the sink
> */
> if (VIMC_IS_SRC(fmt->pad)) {
> + u32 code = fmt->format.code;
> +
> fmt->format = *sink_fmt;
> - /* TODO: Add support for other formats */
> - fmt->format.code = vdeb->src_code;
> +
> + for (i = 0; i < ARRAY_SIZE(src_rgb_codes); i++) {
> + if (src_rgb_codes[i] == code) {
> + *src_code = src_rgb_codes[i];
> + break;
> + }
> + }

Maybe you can add a function for this, since you also repeat this loop above.

Regards,
Helen

> + fmt->format.code = *src_code;
> } else {
> /* Set the new format in the sink pad */
> vimc_deb_adjust_sink_fmt(&fmt->format);
> @@ -291,11 +310,21 @@ static void vimc_deb_set_rgb_mbus_fmt_rgb888_1x24(struct vimc_deb_device *vdeb,
> unsigned int col,
> unsigned int rgb[3])
> {
> + const struct vimc_pix_map *vpix;
> unsigned int i, index;
>
> + vpix = vimc_pix_map_by_code(vdeb->src_code);
> index = VIMC_FRAME_INDEX(lin, col, vdeb->sink_fmt.width, 3);
> - for (i = 0; i < 3; i++)
> - vdeb->src_frame[index + i] = rgb[i];
> + for (i = 0; i < 3; i++) {
> + switch (vpix->pixelformat) {
> + case V4L2_PIX_FMT_RGB24:
> + vdeb->src_frame[index + i] = rgb[i];
> + break;
> + case V4L2_PIX_FMT_BGR24:
> + vdeb->src_frame[index + i] = rgb[2-i];
> + break;
> + }
> + }
> }
>
> static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)
>

\
 
 \ /
  Last update: 2020-02-05 15:18    [W:1.882 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site