lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/5] dt-bindings: hwmon: Document adt7475 pwm-active-state property
Date
Add binding information for the adi,pwm-active-state property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
Changes in v5:
- change to adi,pwm-active-state
- uint32 array

Changes in v4:
- use $ref uint32 and enum
- add adi vendor prefix

Cahnges in v3:
- new

.../devicetree/bindings/hwmon/adt7475.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index e40612ee075f..76985034ea73 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -50,6 +50,19 @@ patternProperties:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]

+ "^adi,pwm-active-state$":
+ description: |
+ Integer array, represents the active state of the pwm outputs If set to 0
+ the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
+ uses a logic high output for 100% duty cycle.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - minItems: 3
+ maxItems: 3
+ items:
+ enum: [0, 1]
+ default: 1
+
required:
- compatible
- reg
@@ -65,6 +78,7 @@ examples:
reg = <0x2e>;
adi,bypass-attenuator-in0 = <1>;
adi,bypass-attenuator-in1 = <0>;
+ adi,pwm-active-state = <1 0 1>;
};
};

--
2.25.1
\
 
 \ /
  Last update: 2020-02-27 09:48    [W:0.063 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site