lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property
Date
From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>

Add documentation for the bypass-attenuator-in[0-4] property.

Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Notes:
Changes in v5:
- add review from Rob

Changes in v4:
- use $ref uint32 and enum
- add 'adi' vendor prefix

Changes in v3:
- separated addition of new properties from conversion to yaml

.../devicetree/bindings/hwmon/adt7475.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 2252499ea201..e40612ee075f 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -39,6 +39,17 @@ properties:
reg:
maxItems: 1

+patternProperties:
+ "^adi,bypass-attenuator-in[0-4]$":
+ description: |
+ Configures bypassing the individual voltage input attenuator. If
+ set to 1 the attenuator is bypassed if set to 0 the attenuator is
+ not bypassed. If the property is absent then the attenuator
+ retains it's configuration from the bios/bootloader.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1]
+
required:
- compatible
- reg
@@ -52,6 +63,8 @@ examples:
hwmon@2e {
compatible = "adi,adt7476";
reg = <0x2e>;
+ adi,bypass-attenuator-in0 = <1>;
+ adi,bypass-attenuator-in1 = <0>;
};
};

--
2.25.1
\
 
 \ /
  Last update: 2020-02-27 09:48    [W:0.094 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site