lkml.org 
[lkml]   [2020]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpio: eic-sprd: break loop when getting NULL device resource
Date
From: Chunyan Zhang <chunyan.zhang@unisoc.com>

EIC controller have unfixed numbers of banks on different Spreadtrum SoCs,
and each bank has its own base address, the loop of getting there base
address in driver should break if the resource gotten via
platform_get_resource() is NULL already. The later ones would be all NULL
even if the loop continues.

Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
drivers/gpio/gpio-eic-sprd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
index ad61daf6c212..865ab2b34fdd 100644
--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -598,7 +598,7 @@ static int sprd_eic_probe(struct platform_device *pdev)
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (!res)
- continue;
+ break;

sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(sprd_eic->base[i]))
--
2.25.1
\
 
 \ /
  Last update: 2020-12-09 06:53    [W:0.059 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site