lkml.org 
[lkml]   [2020]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/6] interconnect: qcom: Consolidate interconnect RPMh support
Date
Add bcm voter driver and add support for RPMh specific interconnect providers
which implements the set and aggregate functionalities that translates
bandwidth requests into RPMh messages. These modules provide a common set of
functionalities for all Qualcomm RPMh based interconnect providers and
should help reduce code duplication when adding new providers.

Signed-off-by: David Dai <daidavid1@codeaurora.org>
---
drivers/interconnect/qcom/Kconfig | 8 +
drivers/interconnect/qcom/Makefile | 4 +
drivers/interconnect/qcom/bcm-voter.c | 363 ++++++++++++++++++++++++++++++++++
drivers/interconnect/qcom/bcm-voter.h | 28 +++
drivers/interconnect/qcom/icc-rpmh.c | 158 +++++++++++++++
drivers/interconnect/qcom/icc-rpmh.h | 151 ++++++++++++++
6 files changed, 712 insertions(+)
create mode 100644 drivers/interconnect/qcom/bcm-voter.c
create mode 100644 drivers/interconnect/qcom/bcm-voter.h
create mode 100644 drivers/interconnect/qcom/icc-rpmh.c
create mode 100644 drivers/interconnect/qcom/icc-rpmh.h

diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 2f9304d..cd100a4 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -5,6 +5,9 @@ config INTERCONNECT_QCOM
help
Support for Qualcomm's Network-on-Chip interconnect hardware.

+config INTERCONNECT_QCOM_BCM_VOTER
+ tristate
+
config INTERCONNECT_QCOM_MSM8974
tristate "Qualcomm MSM8974 interconnect driver"
depends on INTERCONNECT_QCOM
@@ -23,10 +26,15 @@ config INTERCONNECT_QCOM_QCS404
This is a driver for the Qualcomm Network-on-Chip on qcs404-based
platforms.

+config INTERCONNECT_QCOM_RPMH
+ tristate
+
config INTERCONNECT_QCOM_SDM845
tristate "Qualcomm SDM845 interconnect driver"
depends on INTERCONNECT_QCOM
depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST
+ select INTERCONNECT_QCOM_RPMH
+ select INTERCONNECT_QCOM_BCM_VOTER
help
This is a driver for the Qualcomm Network-on-Chip on sdm845-based
platforms.
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 9adf9e3..9317fa7 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -4,8 +4,12 @@ qnoc-msm8974-objs := msm8974.o
qnoc-qcs404-objs := qcs404.o
qnoc-sdm845-objs := sdm845.o
icc-smd-rpm-objs := smd-rpm.o
+icc-bcm-voter-objs := bcm-voter.o
+icc-rpmh-obj := icc-rpmh.o

+obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o
obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o
obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
+obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o
obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c
new file mode 100644
index 0000000..a65680e
--- /dev/null
+++ b/drivers/interconnect/qcom/bcm-voter.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+#include <linux/interconnect-provider.h>
+#include <linux/list_sort.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
+
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+
+static LIST_HEAD(bcm_voters);
+
+/**
+ * struct bcm_voter - Bus Clock Manager voter
+ * @dev: reference to the device that communicates with the BCM
+ * @np: reference to the device node to match bcm voters
+ * @lock: mutex to protect commit and wake/sleep lists in the voter
+ * @commit_list: list containing bcms to be committed to hardware
+ * @ws_list: list containing bcms that have different wake/sleep votes
+ * @voter_node: list of bcm voters
+ */
+struct bcm_voter {
+ struct device *dev;
+ struct device_node *np;
+ struct mutex lock;
+ struct list_head commit_list;
+ struct list_head ws_list;
+ struct list_head voter_node;
+};
+
+static int cmp_vcd(void *priv, struct list_head *a, struct list_head *b)
+{
+ const struct qcom_icc_bcm *bcm_a =
+ list_entry(a, struct qcom_icc_bcm, list);
+ const struct qcom_icc_bcm *bcm_b =
+ list_entry(b, struct qcom_icc_bcm, list);
+
+ if (bcm_a->aux_data.vcd < bcm_b->aux_data.vcd)
+ return -1;
+ else if (bcm_a->aux_data.vcd == bcm_b->aux_data.vcd)
+ return 0;
+ else
+ return 1;
+}
+
+static void bcm_aggregate(struct qcom_icc_bcm *bcm)
+{
+ size_t i, bucket;
+ u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0};
+ u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0};
+ u64 temp;
+
+ for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) {
+ for (i = 0; i < bcm->num_nodes; i++) {
+ temp = bcm->nodes[i]->sum_avg[bucket] * bcm->aux_data.width;
+ do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels);
+ agg_avg[bucket] = max(agg_avg[bucket], temp);
+
+ temp = bcm->nodes[i]->max_peak[bucket] * bcm->aux_data.width;
+ do_div(temp, bcm->nodes[i]->buswidth);
+ agg_peak[bucket] = max(agg_peak[bucket], temp);
+ }
+
+ temp = agg_avg[bucket] * 1000ULL;
+ do_div(temp, bcm->aux_data.unit);
+ bcm->vote_x[bucket] = temp;
+
+ temp = agg_peak[bucket] * 1000ULL;
+ do_div(temp, bcm->aux_data.unit);
+ bcm->vote_y[bucket] = temp;
+ }
+
+ if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 &&
+ bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) {
+ bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1;
+ bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1;
+ bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1;
+ bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1;
+ }
+}
+
+static inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y,
+ u32 addr, bool commit)
+{
+ bool valid = true;
+
+ if (!cmd)
+ return;
+
+ if (vote_x == 0 && vote_y == 0)
+ valid = false;
+
+ if (vote_x > BCM_TCS_CMD_VOTE_MASK)
+ vote_x = BCM_TCS_CMD_VOTE_MASK;
+
+ if (vote_y > BCM_TCS_CMD_VOTE_MASK)
+ vote_y = BCM_TCS_CMD_VOTE_MASK;
+
+ cmd->addr = addr;
+ cmd->data = BCM_TCS_CMD(commit, valid, vote_x, vote_y);
+
+ /*
+ * Set the wait for completion flag on command that need to be completed
+ * before the next command.
+ */
+ if (commit)
+ cmd->wait = true;
+}
+
+static void tcs_list_gen(struct list_head *bcm_list, int bucket,
+ struct tcs_cmd tcs_list[MAX_VCD],
+ int n[MAX_VCD])
+{
+ struct qcom_icc_bcm *bcm;
+ bool commit;
+ size_t idx = 0, batch = 0, cur_vcd_size = 0;
+
+ memset(n, 0, sizeof(int) * MAX_VCD);
+
+ list_for_each_entry(bcm, bcm_list, list) {
+ commit = false;
+ cur_vcd_size++;
+ if ((list_is_last(&bcm->list, bcm_list)) ||
+ bcm->aux_data.vcd != list_next_entry(bcm, list)->aux_data.vcd) {
+ commit = true;
+ cur_vcd_size = 0;
+ }
+ tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket],
+ bcm->vote_y[bucket], bcm->addr, commit);
+ idx++;
+ n[batch]++;
+ /*
+ * Batch the BCMs in such a way that we do not split them in
+ * multiple payloads when they are under the same VCD. This is
+ * to ensure that every BCM is committed since we only set the
+ * commit bit on the last BCM request of every VCD.
+ */
+ if (n[batch] >= MAX_RPMH_PAYLOAD) {
+ if (!commit) {
+ n[batch] = cur_vcd_size;
+ n[batch + 1] = cur_vcd_size;
+ }
+ batch++;
+ }
+ }
+}
+
+/**
+ * of_bcm_voter_get - gets a bcm voter handle from DT node
+ * @dev: device pointer for the consumer device
+ * @name: name for the bcm voter device
+ *
+ * This function will match a device_node pointer for the phandle
+ * specified in the device DT and return a bcm_voter handle on success.
+ *
+ * Returns bcm_voter pointer or ERR_PTR() on error. EPROBE_DEFER is returned
+ * when matching bcm voter is yet to be found.
+ */
+struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name)
+{
+ struct bcm_voter *voter = ERR_PTR(-EPROBE_DEFER);
+ struct bcm_voter *temp;
+ struct device_node *np, *node;
+ int idx = 0;
+
+ if (!dev || !dev->of_node)
+ return ERR_PTR(-ENODEV);
+
+ np = dev->of_node;
+
+ if (name) {
+ idx = of_property_match_string(np, "qcom,bcm-voter-names", name);
+ if (idx < 0)
+ return ERR_PTR(idx);
+ }
+
+ node = of_parse_phandle(np, "qcom,bcm-voters", idx);
+
+ list_for_each_entry(temp, &bcm_voters, voter_node) {
+ if (temp->np == node) {
+ voter = temp;
+ break;
+ }
+ }
+
+ return voter;
+}
+EXPORT_SYMBOL_GPL(of_bcm_voter_get);
+
+/**
+ * qcom_icc_bcm_voter_add - queues up the bcm nodes that require updates
+ * @voter: voter that the bcms are being added to
+ * @bcm: bcm to add to the commit and wake sleep list
+ */
+void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm)
+{
+ if (!voter)
+ return;
+
+ mutex_lock(&voter->lock);
+ if (list_empty(&bcm->list))
+ list_add_tail(&bcm->list, &voter->commit_list);
+
+ if (list_empty(&bcm->ws_list))
+ list_add_tail(&bcm->ws_list, &voter->ws_list);
+
+ mutex_unlock(&voter->lock);
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_add);
+
+/**
+ * qcom_icc_bcm_voter_commit - generates and commits tcs cmds based on bcms
+ * @voter: voter that needs flushing
+ *
+ * This function generates a set of AMC commands and flushes to the BCM device
+ * associated with the voter. It conditionally generate WAKE and SLEEP commands
+ * based on deltas between WAKE/SLEEP requirements. The ws_list persists
+ * through multiple commit requests and bcm nodes are removed only when the
+ * requirements for WAKE matches SLEEP.
+ *
+ * Returns 0 on success, or an appropriate error code otherwise.
+ */
+int qcom_icc_bcm_voter_commit(struct bcm_voter *voter)
+{
+ struct qcom_icc_bcm *bcm;
+ struct qcom_icc_bcm *bcm_tmp;
+ int commit_idx[MAX_VCD];
+ struct tcs_cmd cmds[MAX_BCMS];
+ int ret = 0;
+
+ if (!voter)
+ return 0;
+
+ mutex_lock(&voter->lock);
+ list_for_each_entry(bcm, &voter->commit_list, list)
+ bcm_aggregate(bcm);
+
+ /*
+ * Pre sort the BCMs based on VCD for ease of generating a command list
+ * that groups the BCMs with the same VCD together. VCDs are numbered
+ * with lowest being the most expensive time wise, ensuring that
+ * those commands are being sent the earliest in the queue. This needs
+ * to be sorted every commit since we can't guarantee the order in which
+ * the BCMs are added to the list.
+ */
+ list_sort(NULL, &voter->commit_list, cmp_vcd);
+
+ /*
+ * Construct the command list based on a pre ordered list of BCMs
+ * based on VCD.
+ */
+ tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_AMC, cmds, commit_idx);
+
+ if (!commit_idx[0])
+ goto out;
+
+ ret = rpmh_invalidate(voter->dev);
+ if (ret) {
+ pr_err("Error invalidating RPMH client (%d)\n", ret);
+ goto out;
+ }
+
+ ret = rpmh_write_batch(voter->dev, RPMH_ACTIVE_ONLY_STATE,
+ cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending AMC RPMH requests (%d)\n", ret);
+ goto out;
+ }
+
+ list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list)
+ list_del_init(&bcm->list);
+
+ INIT_LIST_HEAD(&voter->commit_list);
+
+ list_for_each_entry_safe(bcm, bcm_tmp, &voter->ws_list, ws_list) {
+ /*
+ * Only generate WAKE and SLEEP commands if a resource's
+ * requirements change as the execution environment transitions
+ * between different power states.
+ */
+ if (bcm->vote_x[QCOM_ICC_BUCKET_WAKE] !=
+ bcm->vote_x[QCOM_ICC_BUCKET_SLEEP] ||
+ bcm->vote_y[QCOM_ICC_BUCKET_WAKE] !=
+ bcm->vote_y[QCOM_ICC_BUCKET_SLEEP])
+ list_add_tail(&bcm->list, &voter->commit_list);
+ else
+ list_del_init(&bcm->ws_list);
+ }
+
+ if (list_empty(&voter->commit_list))
+ goto out;
+
+ list_sort(NULL, &voter->commit_list, cmp_vcd);
+
+ tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_WAKE, cmds, commit_idx);
+
+ ret = rpmh_write_batch(voter->dev, RPMH_WAKE_ONLY_STATE, cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending WAKE RPMH requests (%d)\n", ret);
+ goto out;
+ }
+
+ tcs_list_gen(&voter->commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, commit_idx);
+
+ ret = rpmh_write_batch(voter->dev, RPMH_SLEEP_STATE, cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending SLEEP RPMH requests (%d)\n", ret);
+ goto out;
+ }
+
+out:
+ list_for_each_entry_safe(bcm, bcm_tmp, &voter->commit_list, list)
+ list_del_init(&bcm->list);
+
+ INIT_LIST_HEAD(&voter->commit_list);
+ mutex_unlock(&voter->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_voter_commit);
+
+static int qcom_icc_bcm_voter_probe(struct platform_device *pdev)
+{
+ struct bcm_voter *voter;
+
+ voter = devm_kzalloc(&pdev->dev, sizeof(*voter), GFP_KERNEL);
+ if (!voter)
+ return -ENOMEM;
+
+ voter->dev = &pdev->dev;
+ voter->np = pdev->dev.of_node;
+ mutex_init(&voter->lock);
+ INIT_LIST_HEAD(&voter->commit_list);
+ INIT_LIST_HEAD(&voter->ws_list);
+ list_add_tail(&voter->voter_node, &bcm_voters);
+
+ return 0;
+}
+
+static const struct of_device_id bcm_voter_of_match[] = {
+ { .compatible = "qcom,sdm845-bcm-voter" },
+ { },
+};
+
+static struct platform_driver qcom_icc_bcm_voter_driver = {
+ .probe = qcom_icc_bcm_voter_probe,
+ .driver = {
+ .name = "sdm845_bcm_voter",
+ .of_match_table = bcm_voter_of_match,
+ },
+};
+module_platform_driver(qcom_icc_bcm_voter_driver);
+MODULE_AUTHOR("David Dai <daidavid1@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm BCM Voter interconnect driver");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/interconnect/qcom/bcm-voter.h b/drivers/interconnect/qcom/bcm-voter.h
new file mode 100644
index 0000000..808b068
--- /dev/null
+++ b/drivers/interconnect/qcom/bcm-voter.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__
+#define __DRIVERS_INTERCONNECT_QCOM_BCM_VOTER_H__
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
+
+#include "icc-rpmh.h"
+
+#define DEFINE_QBCM(_name, _bcmname, _keepalive, _numnodes, ...) \
+ static struct qcom_icc_bcm _name = { \
+ .name = _bcmname, \
+ .keepalive = _keepalive, \
+ .num_nodes = _numnodes, \
+ .nodes = { __VA_ARGS__ }, \
+ }
+
+struct bcm_voter *of_bcm_voter_get(struct device *dev, const char *name);
+void qcom_icc_bcm_voter_add(struct bcm_voter *voter, struct qcom_icc_bcm *bcm);
+int qcom_icc_bcm_voter_commit(struct bcm_voter *voter);
+
+#endif
diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
new file mode 100644
index 0000000..09ad9fe
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <asm/div64.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+
+/**
+ * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set
+ * @node: icc node to operate on
+ */
+void qcom_icc_pre_aggregate(struct icc_node *node)
+{
+ size_t i;
+ struct qcom_icc_node *qn;
+
+ qn = node->data;
+
+ for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ qn->sum_avg[i] = 0;
+ qn->max_peak[i] = 0;
+ }
+}
+EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate);
+
+/**
+ * qcom_icc_aggregate - aggregate bw for buckets indicated by tag
+ * @node: node to aggregate
+ * @tag: tag to indicate which buckets to aggregate
+ * @avg_bw: new bw to sum aggregate
+ * @peak_bw: new bw to max aggregate
+ * @agg_avg: existing aggregate avg bw val
+ * @agg_peak: existing aggregate peak bw val
+ */
+int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+ size_t i;
+ struct qcom_icc_node *qn;
+ struct qcom_icc_provider *qp;
+
+ qn = node->data;
+ qp = to_qcom_provider(node->provider);
+
+ if (!tag)
+ tag = QCOM_ICC_TAG_ALWAYS;
+
+ for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ if (tag & BIT(i)) {
+ qn->sum_avg[i] += avg_bw;
+ qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
+ }
+ }
+
+ *agg_avg += avg_bw;
+ *agg_peak = max_t(u32, *agg_peak, peak_bw);
+
+ for (i = 0; i < qn->num_bcms; i++)
+ qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_aggregate);
+
+/**
+ * qcom_icc_set - set the constraints based on path
+ * @src: source node for the path to set constraints on
+ * @dst: destination node for the path to set constraints on
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+ struct qcom_icc_provider *qp;
+ struct icc_node *node;
+ int ret = 0;
+
+ if (!src)
+ node = dst;
+ else
+ node = src;
+
+ qp = to_qcom_provider(node->provider);
+
+ qcom_icc_bcm_voter_commit(qp->voter);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_set);
+
+/**
+ * qcom_icc_bcm_init - populates bcm aux data and connect qnodes
+ * @bcm: bcm to be initialized
+ * @dev: associated provider device
+ *
+ * Return: 0 on success, or an error code otherwise
+ */
+int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev)
+{
+ struct qcom_icc_node *qn;
+ const struct bcm_db *data;
+ size_t data_count;
+ int i;
+
+ bcm->addr = cmd_db_read_addr(bcm->name);
+ if (!bcm->addr) {
+ dev_err(dev, "%s could not find RPMh address\n",
+ bcm->name);
+ return -EINVAL;
+ }
+
+ data = cmd_db_read_aux_data(bcm->name, &data_count);
+ if (IS_ERR(data)) {
+ dev_err(dev, "%s command db read error (%ld)\n",
+ bcm->name, PTR_ERR(data));
+ return PTR_ERR(data);
+ }
+ if (!data_count) {
+ dev_err(dev, "%s command db missing or partial aux data\n",
+ bcm->name);
+ return -EINVAL;
+ }
+
+ bcm->aux_data.unit = le32_to_cpu(data->unit);
+ bcm->aux_data.width = le16_to_cpu(data->width);
+ bcm->aux_data.vcd = data->vcd;
+ bcm->aux_data.reserved = data->reserved;
+ INIT_LIST_HEAD(&bcm->list);
+ INIT_LIST_HEAD(&bcm->ws_list);
+
+ /*
+ * Link Qnodes to their respective BCMs
+ */
+ for (i = 0; i < bcm->num_nodes; i++) {
+ qn = bcm->nodes[i];
+ qn->bcms[qn->num_bcms] = bcm;
+ qn->num_bcms++;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_bcm_init);
+
+static struct platform_driver qcom_icc_rpmh_driver = {
+ .driver = {
+ .name = "icc_rpmh",
+ },
+};
+module_platform_driver(qcom_icc_rpmh_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
new file mode 100644
index 0000000..0ff8f8d
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
+#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
+
+#define to_qcom_provider(_provider) \
+ container_of(_provider, struct qcom_icc_provider, provider)
+
+/**
+ * struct qcom_icc_provider - Qualcomm specific interconnect provider
+ * @provider: generic interconnect provider
+ * @dev: reference to the NoC device
+ * @bcms: list of bcms that maps to the provider
+ * @num_bcms: number of @bcms
+ * @voter: bcm voter targeted by this provider
+ */
+struct qcom_icc_provider {
+ struct icc_provider provider;
+ struct device *dev;
+ struct qcom_icc_bcm **bcms;
+ size_t num_bcms;
+ struct bcm_voter *voter;
+};
+
+/**
+ * struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager (BCM)
+ * @unit: divisor used to convert bytes/sec bw value to an RPMh msg
+ * @width: multiplier used to convert bytes/sec bw value to an RPMh msg
+ * @vcd: virtual clock domain that this bcm belongs to
+ * @reserved: reserved field
+ */
+struct bcm_db {
+ __le32 unit;
+ __le16 width;
+ u8 vcd;
+ u8 reserved;
+};
+
+#define MAX_LINKS 128
+#define MAX_BCMS 64
+#define MAX_BCM_PER_NODE 3
+#define MAX_VCD 10
+
+/*
+ * The AMC bucket denotes constraints that are applied to hardware when
+ * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
+ * when the execution environment transitions between active and low power mode.
+ */
+#define QCOM_ICC_BUCKET_AMC 0
+#define QCOM_ICC_BUCKET_WAKE 1
+#define QCOM_ICC_BUCKET_SLEEP 2
+#define QCOM_ICC_NUM_BUCKETS 3
+#define QCOM_ICC_TAG_AMC BIT(QCOM_ICC_BUCKET_AMC)
+#define QCOM_ICC_TAG_WAKE BIT(QCOM_ICC_BUCKET_WAKE)
+#define QCOM_ICC_TAG_SLEEP BIT(QCOM_ICC_BUCKET_SLEEP)
+#define QCOM_ICC_TAG_ACTIVE_ONLY (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
+#define QCOM_ICC_TAG_ALWAYS (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
+ QCOM_ICC_TAG_SLEEP)
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @links: an array of nodes where we can go next while traversing
+ * @id: a unique node identifier
+ * @num_links: the total number of @links
+ * @channels: num of channels at this node
+ * @buswidth: width of the interconnect between a node and the bus
+ * @sum_avg: current sum aggregate value of all avg bw requests
+ * @max_peak: current max aggregate value of all peak bw requests
+ * @bcms: list of bcms associated with this logical node
+ * @num_bcms: num of @bcms
+ */
+struct qcom_icc_node {
+ const char *name;
+ u16 links[MAX_LINKS];
+ u16 id;
+ u16 num_links;
+ u16 channels;
+ u16 buswidth;
+ u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+ u64 max_peak[QCOM_ICC_NUM_BUCKETS];
+ struct qcom_icc_bcm *bcms[MAX_BCM_PER_NODE];
+ size_t num_bcms;
+};
+
+/**
+ * struct qcom_icc_bcm - Qualcomm specific hardware accelerator nodes
+ * known as Bus Clock Manager (BCM)
+ * @name: the bcm node name used to fetch BCM data from command db
+ * @type: latency or bandwidth bcm
+ * @addr: address offsets used when voting to RPMH
+ * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm
+ * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm
+ * @dirty: flag used to indicate whether the bcm needs to be committed
+ * @keepalive: flag used to indicate whether a keepalive is required
+ * @aux_data: auxiliary data used when calculating threshold values and
+ * communicating with RPMh
+ * @list: used to link to other bcms when compiling lists for commit
+ * @ws_list: used to keep track of bcms that may transition between wake/sleep
+ * @num_nodes: total number of @num_nodes
+ * @nodes: list of qcom_icc_nodes that this BCM encapsulates
+ */
+struct qcom_icc_bcm {
+ const char *name;
+ u32 type;
+ u32 addr;
+ u64 vote_x[QCOM_ICC_NUM_BUCKETS];
+ u64 vote_y[QCOM_ICC_NUM_BUCKETS];
+ bool dirty;
+ bool keepalive;
+ struct bcm_db aux_data;
+ struct list_head list;
+ struct list_head ws_list;
+ size_t num_nodes;
+ struct qcom_icc_node *nodes[];
+};
+
+struct qcom_icc_fabric {
+ struct qcom_icc_node **nodes;
+ size_t num_nodes;
+};
+
+struct qcom_icc_desc {
+ struct qcom_icc_node **nodes;
+ size_t num_nodes;
+ struct qcom_icc_bcm **bcms;
+ size_t num_bcms;
+};
+
+#define DEFINE_QNODE(_name, _id, _channels, _buswidth, \
+ _numlinks, ...) \
+ static struct qcom_icc_node _name = { \
+ .id = _id, \
+ .name = #_name, \
+ .channels = _channels, \
+ .buswidth = _buswidth, \
+ .num_links = _numlinks, \
+ .links = { __VA_ARGS__ }, \
+ }
+
+int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
+int qcom_icc_set(struct icc_node *src, struct icc_node *dst);
+int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev);
+void qcom_icc_pre_aggregate(struct icc_node *node);
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-01-10 05:34    [W:0.143 / U:6.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site