lkml.org 
[lkml]   [2020]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board
Date
On rk3399-roc-pc board a voltage regulator MP8859 from Monolithic Power Systems
is used to supply the 12V power line. This delivers 5V as a default value after
boot. The voltage is controllable via I2C.
Add a basic driver to set and get the voltage of the MP8859 and add a matching
node with fixed 12V in the DT of the board.

Markus Reichl (5):
regulator: mp8859: add driver
regulator: mp8859: add config option and build entry
dt-bindings: add vendor Monolithic Power Systems
dt-bindings: regulator: add MPS mp8859 voltage regulator
arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc

.../devicetree/bindings/regulator/mp8859.txt | 22 +++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 32 ++--
drivers/regulator/Kconfig | 11 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/mp8859.c | 156 ++++++++++++++++++
6 files changed, 210 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/mp8859.txt
create mode 100644 drivers/regulator/mp8859.c

--
2.24.1

\
 
 \ /
  Last update: 2020-01-04 16:35    [W:0.040 / U:1.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site