lkml.org 
[lkml]   [2020]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/5] drm: Add support for Okaya RH128128T
Date
	Hi all,

This patch series adds support for the Okaya RH128128T LCD to the
existing ST7735R driver. This is a 128x128 1.4" TFT display driven by a
Sitronix ST7715R TFT Controller/Driver. It is used on e.g. the Renesas
YRSK-LCD-PMOD extension board, which is shipped with Renesas RSK+RZA1
development boards[1], and with several other Renesas starter kits, for
RX, Synergy, and RZ/T1 MCUs and SoCs.

Changes compared to v1[2]:
- Convert DT bindings to DT schema,
- Add YRSK-LCD-PMOD reference and links,
- Add Reviewed-by,
- Split driver preparation and adding actual support in two separate
patches,
- Replace st7735r_priv.rgb by a pointer to struct st7735r_cfg,
- Change prefix of jd_t18003_t01_pipe_enable() and
jd_t18003_t01_pipe_funcs(),
- Update Kconfig help text,
- Improve file comment header.

This has been tested using the r7s72100-rskrza1-pmod-spi.dtso and
r7s72100-rskrza1-pmod2-lcd.dtso DT overlays[3].
Note that for using this on RSK+RZA1, there is a dependency on RSPI
cs-gpios support (now in linux-next).
With DT overlays, this also depends on DT overlays[4] and gpio-hog
overlay support[5].

Thanks!

[1] https://renesasrulz.com/the_vault/f/archive-forum/4981/upgrading-to-the-renesas-rz-a1h
[1] https://lore.kernel.org/dri-devel/20200102141246.370-1-geert+renesas@glider.be/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays
[4] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/overlays
[5] "[PATCH/RFC 0/2] gpio: of: Add DT overlay support for GPIO hogs"
https://lore.kernel.org/lkml/20191230133852.5890-1-geert+renesas@glider.be/

Geert Uytterhoeven (5):
dt-bindings: display: sitronix,st7735r: Convert to DT schema
dt-bindings: display: sitronix,st7735r: Add Okaya RH128128T
drm/mipi_dbi: Add support for display offsets
drm: tiny: st7735r: Prepare for adding support for more displays
drm: tiny: st7735r: Add support for Okaya RH128128T

.../bindings/display/sitronix,st7735r.txt | 35 ---------
.../bindings/display/sitronix,st7735r.yaml | 71 +++++++++++++++++
MAINTAINERS | 2 +-
drivers/gpu/drm/drm_mipi_dbi.c | 30 +++++---
drivers/gpu/drm/tiny/Kconfig | 8 +-
drivers/gpu/drm/tiny/st7735r.c | 76 +++++++++++++++----
include/drm/drm_mipi_dbi.h | 12 +++
7 files changed, 170 insertions(+), 64 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/sitronix,st7735r.txt
create mode 100644 Documentation/devicetree/bindings/display/sitronix,st7735r.yaml

--
2.17.1

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2020-01-15 13:46    [W:0.752 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site