lkml.org 
[lkml]   [2019]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon: pmbus: Add Inspur Power System power supply driver
Date
Add the driver to monitor Inspur Power System power supplies
with hwmon over pmbus.

This driver adds debugfs entries for addintional power supply data,
including vendor,model,part_number,serial number,firmware revision,
hardware revision,and psu mode(active/standby).

Signed-off-by: John Wang <wangzqbj@inspur.com>
---
drivers/hwmon/pmbus/Kconfig | 9 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/inspur-ipsps.c | 291 +++++++++++++++++++++++++++++
3 files changed, 301 insertions(+)
create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 30751eb9550a..c09357c26b10 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -203,4 +203,13 @@ config SENSORS_ZL6100
This driver can also be built as a module. If so, the module will
be called zl6100.

+config SENSORS_INSPUR_IPSPS
+ tristate "INSPUR Power System Power Supply"
+ help
+ If you say yes here you get hardware monitoring support for the INSPUR
+ Power System power supply.
+
+ This driver can also be built as a module. If so, the module will
+ be called inspur-ipsps.
+
endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 2219b9300316..fde2d10cd05c 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
+obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
new file mode 100644
index 000000000000..7dc2b00cb192
--- /dev/null
+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2019 Inspur Corp.
+ */
+
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+#define IPSPS_VENDOR_ID 0x99
+#define IPSPS_MODEL 0x9A
+#define IPSPS_FW_VERSION 0x9B
+#define IPSPS_PN 0x9C
+#define IPSPS_SN 0x9E
+#define IPSPS_HW_VERSION 0xB0
+#define IPSPS_MODE 0xFC
+
+#define MODE_ACTIVE 0x55
+#define MODE_STANDBY 0x0E
+#define MODE_REDUNDANCY 0x00
+
+#define MODE_ACTIVE_STRING "active"
+#define MODE_STANDBY_STRING "standby"
+#define MODE_REDUNDANCY_STRING "redundancy"
+
+struct ipsps_attr {
+ u8 reg;
+ umode_t mode;
+ const char *name;
+ int mask;
+ const struct file_operations *fops;
+};
+
+struct ipsps_entry {
+ struct i2c_client *client;
+ u8 reg;
+};
+
+static ssize_t ipsps_string_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct ipsps_entry *entry = file->private_data;
+ char data[I2C_SMBUS_BLOCK_MAX + 1] = { 0 };
+ int i, rc;
+
+ rc = i2c_smbus_read_block_data(entry->client, entry->reg, data);
+ if (rc <= 0)
+ return rc;
+
+ for (i = 0; i < rc; i++) {
+ if (data[i] == '#')
+ break;
+ }
+
+ data[i] = '\n';
+ i++;
+ data[i] = '\0';
+ i++;
+
+ return simple_read_from_buffer(buf, count, ppos, data, i);
+
+}
+
+static ssize_t ipsps_fw_version_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ char data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+ int rc;
+ struct ipsps_entry *entry = file->private_data;
+
+ rc = i2c_smbus_read_block_data(entry->client, entry->reg, data);
+ if (rc < 0)
+ return rc;
+
+ if (rc != 6)
+ return -ENODATA;
+
+ rc = snprintf(data, sizeof(data), "%d.%02d.%02d\n",
+ data[1], data[2], data[3]);
+
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static ssize_t ipsps_mode_read(struct file *file,
+ char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ int rc;
+ char data[64] = { 0 };
+ struct ipsps_entry *entry = file->private_data;
+
+ rc = i2c_smbus_read_byte_data(entry->client, entry->reg);
+ if (rc < 0)
+ return rc;
+
+ switch (rc) {
+ case MODE_ACTIVE:
+ rc = snprintf(data, sizeof(data), "[%s] %s %s\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ break;
+ case MODE_STANDBY:
+ rc = snprintf(data, sizeof(data), "%s [%s] %s\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ break;
+ case MODE_REDUNDANCY:
+ rc = snprintf(data, sizeof(data), "%s %s [%s]\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ break;
+ default:
+ rc = snprintf(data, sizeof(data), "unspecified\n");
+ break;
+ }
+
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static ssize_t ipsps_mode_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int rc;
+ char data[64] = { 0 };
+ struct ipsps_entry *entry = file->private_data;
+
+ rc = simple_write_to_buffer(data, sizeof(data), ppos, buf, count);
+ if (rc < 0)
+ return rc;
+
+ if (strcmp(MODE_STANDBY_STRING, data) == 0 ||
+ strcmp(MODE_STANDBY_STRING"\n", data) == 0) {
+ rc = i2c_smbus_write_byte_data(entry->client, entry->reg,
+ MODE_STANDBY);
+ if (rc < 0)
+ return rc;
+ return count;
+ } else if (strcmp(MODE_ACTIVE_STRING, data) == 0 ||
+ strcmp(MODE_ACTIVE_STRING"\n", data) == 0) {
+ rc = i2c_smbus_write_byte_data(entry->client, entry->reg,
+ MODE_ACTIVE);
+ if (rc < 0)
+ return rc;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static const struct file_operations ipsps_string_fops = {
+ .llseek = noop_llseek,
+ .open = simple_open,
+ .read = ipsps_string_read,
+};
+
+static const struct file_operations ipsps_fw_version_fops = {
+ .llseek = noop_llseek,
+ .open = simple_open,
+ .read = ipsps_fw_version_read,
+};
+
+static const struct file_operations ipsps_mode_fops = {
+ .llseek = noop_llseek,
+ .open = simple_open,
+ .read = ipsps_mode_read,
+ .write = ipsps_mode_write,
+};
+
+struct ipsps_attr ipsps_attrs[] = {
+ {
+ .name = "vendor",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_VENDOR_ID,
+ .mode = 0444,
+ }, {
+ .name = "model",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_MODEL,
+ .mode = 0444,
+ }, {
+ .name = "fw_version",
+ .fops = &ipsps_fw_version_fops,
+ .reg = IPSPS_FW_VERSION,
+ .mode = 0444,
+ }, {
+ .name = "part_number",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_PN,
+ .mode = 0444,
+ }, {
+ .name = "serial_number",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_SN,
+ .mode = 0444,
+ }, {
+ .name = "hw_version",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_HW_VERSION,
+ .mode = 0444,
+ }, {
+ .name = "mode",
+ .fops = &ipsps_mode_fops,
+ .reg = IPSPS_MODE,
+ .mode = 0644,
+ }
+
+};
+
+static struct pmbus_driver_info ipsps_info = {
+ .pages = 1,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+ PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_STATUS_FAN12,
+};
+
+static struct pmbus_platform_data ipsps_pdata = {
+ .flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
+static int ipsps_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i, rc;
+ struct dentry *debugfs;
+ struct dentry *ipsps_dir;
+ struct ipsps_entry *entry;
+
+ client->dev.platform_data = &ipsps_pdata;
+ rc = pmbus_do_probe(client, id, &ipsps_info);
+ if (rc)
+ return rc;
+
+ /* Don't fail the probe if we can't create debugfs */
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return 0;
+
+ ipsps_dir = debugfs_create_dir(client->name, debugfs);
+ if (!ipsps_dir)
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(ipsps_attrs); ++i) {
+ entry = devm_kzalloc(&client->dev, sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return 0;
+
+ entry->client = client;
+ entry->reg = ipsps_attrs[i].reg;
+ debugfs_create_file(ipsps_attrs[i].name, ipsps_attrs[i].mode,
+ ipsps_dir, entry, ipsps_attrs[i].fops);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id ipsps_id[] = {
+ { "inspur_ipsps1", 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ipsps_id);
+
+static const struct of_device_id ipsps_of_match[] = {
+ { .compatible = "inspur,ipsps1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ipsps_of_match);
+
+static struct i2c_driver ipsps_driver = {
+ .driver = {
+ .name = "inspur-ipsps",
+ .of_match_table = ipsps_of_match,
+ },
+ .probe = ipsps_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ipsps_id,
+};
+
+module_i2c_driver(ipsps_driver);
+
+MODULE_AUTHOR("John Wang");
+MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
+MODULE_LICENSE("GPL");
--
2.17.1
\
 
 \ /
  Last update: 2019-08-08 09:48    [W:0.309 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site