lkml.org 
[lkml]   [2019]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] bus: imx-weim: optionally enable burst clock mode
On Fri, Jul 12, 2019 at 04:43:15PM -0400, Sven Van Asbroeck wrote:
> To enable burst clock mode, add the fsl,burst-clk-enable
> property to the weim bus's devicetree node.
>
> Example:
> weim: weim@21b8000 {
> compatible = "fsl,imx6q-weim";
> reg = <0x021b8000 0x4000>;
> clocks = <&clks 196>;
> #address-cells = <2>;
> #size-cells = <1>;
> ranges = <0 0 0x08000000 0x08000000>;
> fsl,weim-cs-gpr = <&gpr>;
> fsl,burst-clk-enable;
>
> client-device@0,0 {
> compatible = "something";
> reg = <0 0 0x02000000>;
> #address-cells = <1>;
> #size-cells = <1>;
> bank-width = <2>;
> fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
> 0x0000c000 0x1404a38e 0x00000000>;
> };
> };
>
> Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>

Applied both, thanks.

\
 
 \ /
  Last update: 2019-08-03 10:23    [W:0.045 / U:36.156 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site