lkml.org 
[lkml]   [2019]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: bus: imx-weim: document optional burst clock mode
Date
An optional devicetree property was added to the imx-weim driver,
which if present instructs it to operate in burst clock mode.
Update the dt-bindings to reflect this.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
---
Documentation/devicetree/bindings/bus/imx-weim.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index dda7d6d66479..1b1d1c5c21ea 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -44,6 +44,10 @@ Optional properties:
what bootloader sets up in IOMUXC_GPR1[11:0] will be
used.

+ - fsl,burst-clk-enable For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+ devices, the presence of this property indicates that
+ the weim bus should operate in Burst Clock Mode.
+
Timing property for child nodes. It is mandatory, not optional.

- fsl,weim-cs-timing: The timing array, contains timing values for the
--
2.17.1
\
 
 \ /
  Last update: 2019-07-12 22:44    [W:1.224 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site