lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: storage: Add ums-cros-aoa driver
Date
This patch adds a new "unusual" USB mass storage device driver. This
driver will be used for a virtual USB storage device presented by an
Android phone running the 'Chrome OS Recovery'* Android app. This app
uses the Android Open Accessory (AOA) API to talk directly to a USB host
attached to the phone.

The AOA protocol requires the host to send a custom vendor command on
EP0 to "switch" the phone into "AOA mode" (making it drop off the bus
and reenumerate with different descriptors). The ums-cros-aoa driver is
just a small stub driver to send these vendor commands. It identifies
the device it should operate on by VID/PID passed in through a module
parameter (e.g. from the bootloader). After the phone is in AOA mode,
the normal USB mass storage stack will recognize it by its special
VID/PID like any other "unusual dev". An initializer function will
further double-check that the device is the device previously operated
on by ums-cros-aoa.

*NOTE: The Android app is still under development and will be released
at a later date. I'm submitting this patch now so that the driver name
and module parameters can be set in stone already, because I have to
bake them into bootloader code that is not field-updatable.

Signed-off-by: Julius Werner <jwerner@chromium.org>
---
drivers/usb/storage/Kconfig | 12 +++
drivers/usb/storage/Makefile | 2 +
drivers/usb/storage/cros-aoa.c | 129 +++++++++++++++++++++++++++++
drivers/usb/storage/initializers.c | 34 ++++++++
drivers/usb/storage/initializers.h | 4 +
drivers/usb/storage/unusual_devs.h | 18 ++++
6 files changed, 199 insertions(+)
create mode 100644 drivers/usb/storage/cros-aoa.c

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 59aad38b490a6..cc901ee2bb766 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -184,6 +184,18 @@ config USB_STORAGE_ENE_UB6250
To compile this driver as a module, choose M here: the
module will be called ums-eneub6250.

+config USB_STORAGE_CROS_AOA
+ tristate "Support for connecting to Chrome OS Recovery Android app"
+ default n
+ depends on USB_STORAGE
+ help
+ Say Y here if you want to connect an Android phone running the Chrome
+ OS Recovery app to this device and mount the image served by that app
+ as a virtual storage device. Unless you're building for Chrome OS, you
+ probably want to say N.
+
+ If this driver is compiled as a module, it will be named ums-cros-aoa.
+
endif # USB_STORAGE

config USB_UAS
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index a67ddcbb4e249..f734741d4658b 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -17,6 +17,7 @@ usb-storage-y += usual-tables.o
usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o

obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
+obj-$(CONFIG_USB_STORAGE_CROS_AOA) += ums-cros-aoa.o
obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o
obj-$(CONFIG_USB_STORAGE_ENE_UB6250) += ums-eneub6250.o
@@ -31,6 +32,7 @@ obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o
obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o

ums-alauda-y := alauda.o
+ums-cros-aoa-y := cros-aoa.o
ums-cypress-y := cypress_atacb.o
ums-datafab-y := datafab.o
ums-eneub6250-y := ene_ub6250.o
diff --git a/drivers/usb/storage/cros-aoa.c b/drivers/usb/storage/cros-aoa.c
new file mode 100644
index 0000000000000..269e9193209d9
--- /dev/null
+++ b/drivers/usb/storage/cros-aoa.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2 WITH Linux-syscall-note
+/*
+ * Driver for Chrome OS Recovery via Android Open Accessory
+ *
+ * (c) 2019 Google LLC (Julius Werner <jwerner@chromium.org>)
+ *
+ * This driver connects to an Android device via the Android Open Accessory
+ * protocol to use it as a USB storage back-end. It is used for system recovery
+ * on Chrome OS. The descriptors sent are specific to the Chrome OS Recovery app
+ * for Android. The driver is inert unless activated by boot firmware with an
+ * explicit kernel command line parameter.
+ */
+
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/usb.h>
+
+#include "initializers.h"
+
+#define DRV_NAME "ums-cros-aoa"
+
+MODULE_DESCRIPTION("Driver for Chrome OS Recovery via Android Open Accessory");
+MODULE_AUTHOR("Julius Werner <jwerner@chromium.org>");
+MODULE_LICENSE("GPL");
+
+#define AOA_GET_PROTOCOL 51
+#define AOA_SET_STRING 52
+#define AOA_START 53
+
+#define AOA_STR_MANUFACTURER 0
+#define AOA_STR_MODEL 1
+#define AOA_STR_DESCRIPTION 2
+#define AOA_STR_VERSION 3
+#define AOA_STR_URI 4
+#define AOA_STR_SERIAL 5
+
+#define CROS_MANUF "Google"
+#define CROS_MODEL "Chrome OS Recovery"
+#define CROS_DESC "Chrome OS device in Recovery Mode"
+#define CROS_VERSION "1.0"
+#define CROS_URI "https://google.com/chromeos/recovery_android"
+
+static char *bind;
+module_param(bind, charp, 0);
+
+static struct usb_device_id cros_aoa_ids[] = {
+ { USB_DEVICE(0, 0) }, /* to be filled out by cros_aoa_init() */
+ { }
+};
+/* No MODULE_DEVICE_TABLE(). Autoloading doesn't make sense for this module. */
+
+static int set_string(struct usb_device *udev, u16 type, const char *string)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), AOA_SET_STRING,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, type, (char *)string, strlen(string) + 1,
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static int cros_aoa_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int rv;
+ u16 aoa_protocol;
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ rv = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), AOA_GET_PROTOCOL,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, &aoa_protocol, sizeof(aoa_protocol),
+ USB_CTRL_GET_TIMEOUT);
+ if (rv < 0 && rv != -EPROTO)
+ goto fail;
+ if (rv != sizeof(aoa_protocol) || aoa_protocol < 1) {
+ dev_err(&intf->dev, "bound device does not support AOA?\n");
+ rv = -ENODEV;
+ goto fail;
+ }
+
+ if ((rv = set_string(udev, AOA_STR_MANUFACTURER, CROS_MANUF)) < 0 ||
+ (rv = set_string(udev, AOA_STR_MODEL, CROS_MODEL)) < 0 ||
+ (rv = set_string(udev, AOA_STR_DESCRIPTION, CROS_DESC)) < 0 ||
+ (rv = set_string(udev, AOA_STR_VERSION, CROS_VERSION)) < 0 ||
+ (rv = set_string(udev, AOA_STR_URI, CROS_URI)) < 0)
+ goto fail;
+
+ rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), AOA_START,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ if (!rv) {
+ dev_info(&intf->dev, "switching to AOA mode\n");
+ usb_stor_cros_aoa_bind_busnum = udev->bus->busnum;
+ usb_stor_cros_aoa_bind_route = udev->route;
+ return 0;
+ }
+
+fail: dev_err(&intf->dev, "probe error %d\n", rv);
+ return rv;
+}
+
+static void cros_aoa_disconnect(struct usb_interface *intf)
+{
+ /* nothing to do -- we expect this to happen right after probe() */
+}
+
+static struct usb_driver cros_aoa_stub_driver = {
+ .name = DRV_NAME,
+ .probe = cros_aoa_probe,
+ .disconnect = cros_aoa_disconnect,
+ .id_table = cros_aoa_ids,
+};
+
+static int __init cros_aoa_init(void)
+{
+ if (!bind || sscanf(bind, "%hx:%hx", &cros_aoa_ids[0].idVendor,
+ &cros_aoa_ids[0].idProduct) != 2)
+ return -ENODEV;
+ pr_info(DRV_NAME ": bound to USB device %4x:%4x\n",
+ cros_aoa_ids[0].idVendor, cros_aoa_ids[0].idProduct);
+ return usb_register(&cros_aoa_stub_driver);
+}
+
+static void __exit cros_aoa_exit(void)
+{
+ usb_deregister(&cros_aoa_stub_driver);
+}
+
+module_init(cros_aoa_init);
+module_exit(cros_aoa_exit);
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index f8f9ce8dc7102..3056db79cd1d9 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,3 +92,37 @@ int usb_stor_huawei_e220_init(struct us_data *us)
usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
return 0;
}
+
+#if defined(CONFIG_USB_STORAGE_CROS_AOA) || \
+ defined(CONFIG_USB_STORAGE_CROS_AOA_MODULE)
+/*
+ * Our VID/PID match grabs any Android device that was switched into Android
+ * Open Accessory mode. We only want to bind to the one that was switched by the
+ * ums-cros-aoa driver. There's no 100% way to identify the same device again
+ * (because it changes all descriptors), but checking that it is on the same bus
+ * with the same topology route should be a pretty good heuristic.
+ */
+int usb_stor_cros_aoa_bind_busnum = -1;
+EXPORT_SYMBOL(usb_stor_cros_aoa_bind_busnum);
+u32 usb_stor_cros_aoa_bind_route;
+EXPORT_SYMBOL(usb_stor_cros_aoa_bind_route);
+
+int usb_stor_cros_aoa_validate(struct us_data *us)
+{
+ if (us->pusb_dev->bus->busnum != usb_stor_cros_aoa_bind_busnum ||
+ us->pusb_dev->route != usb_stor_cros_aoa_bind_route) {
+ dev_info(&us->pusb_intf->dev,
+ "ums-cros-aoa ignoring unknown AOA device\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Only interface 0 connects to the AOA app. Android devices that have
+ * ADB enabled also export an interface 1. We don't want it.
+ */
+ if (us->pusb_intf->cur_altsetting->desc.bInterfaceNumber != 0)
+ return -ENODEV;
+
+ return 0;
+}
+#endif /* defined(CONFIG_USB_STORAGE_CROS_AOA) || ... */
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 2dbf9c7d97492..35fe9ef3247d6 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -37,3 +37,7 @@ int usb_stor_ucr61s2b_init(struct us_data *us);

/* This places the HUAWEI E220 devices in multi-port mode */
int usb_stor_huawei_e220_init(struct us_data *us);
+
+extern int usb_stor_cros_aoa_bind_busnum;
+extern u32 usb_stor_cros_aoa_bind_route;
+int usb_stor_cros_aoa_validate(struct us_data *us);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index ea0d27a94afe0..45fe9bbc6da18 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2259,6 +2259,24 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),

+/*
+ * Using an Android phone as USB storage back-end for Chrome OS recovery. See
+ * usb/storage/cros-aoa.c for details.
+ */
+#if defined(CONFIG_USB_STORAGE_CROS_AOA) || \
+ defined(CONFIG_USB_STORAGE_CROS_AOA_MODULE)
+UNUSUAL_DEV( 0x18d1, 0x2d00, 0x0000, 0xffff,
+ "Google",
+ "Chrome OS Recovery via AOA",
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_cros_aoa_validate,
+ US_FL_SINGLE_LUN | US_FL_CAPACITY_OK),
+UNUSUAL_DEV( 0x18d1, 0x2d01, 0x0000, 0xffff,
+ "Google",
+ "Chrome OS Recovery via AOA (with ADB)",
+ USB_SC_SCSI, USB_PR_BULK, usb_stor_cros_aoa_validate,
+ US_FL_SINGLE_LUN | US_FL_CAPACITY_OK),
+#endif /* defined(CONFIG_USB_STORAGE_CROS_AOA) || ... */
+
/* Supplied with some Castlewood ORB removable drives */
UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999,
"Double-H Technology",
--
2.20.1
\
 
 \ /
  Last update: 2019-08-28 01:14    [W:2.379 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site