lkml.org 
[lkml]   [2019]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ALSA: usb-audio: Fix the mixer control range limiting issue
Date
From: Deepa Madiregama <dmadireg@codeaurora.org>

- mixer_ctl_set() function is limiting the volume level
to particular range. This results in incorrect initial
volume setting for that device.
- In USB mixer while calculating the dBmin/dBmax values
resolution factor is hardcoded to 256 which results in
populating the wrong values for dBmin/dBmax.
- Fix is to use appropriate resolution factor while
calculating the dBmin/dBmax values.

Signed-off-by: Deepa Madiregama <dmadireg@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/usb/mixer.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 5070a6a76ab3..a67448327d07 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1248,8 +1248,10 @@ static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
/* USB descriptions contain the dB scale in 1/256 dB unit
* while ALSA TLV contains in 1/100 dB unit
*/
- cval->dBmin = (convert_signed_value(cval, cval->min) * 100) / 256;
- cval->dBmax = (convert_signed_value(cval, cval->max) * 100) / 256;
+ cval->dBmin =
+ (convert_signed_value(cval, cval->min) * 100) / (cval->res);
+ cval->dBmax =
+ (convert_signed_value(cval, cval->max) * 100) / (cval->res);
if (cval->dBmin > cval->dBmax) {
/* something is wrong; assume it's either from/to 0dB */
if (cval->dBmin < 0)
--
2.21.0
\
 
 \ /
  Last update: 2019-08-21 12:02    [W:2.300 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site