Messages in this thread Patch in this message | | | From | Suman Anna <> | Subject | [PATCH] firmware: ti_sci: Add support for processor control | Date | Wed, 5 Jun 2019 17:33:34 -0500 |
| |
Texas Instrument's System Control Interface (TI-SCI) Message Protocol is used in Texas Instrument's System on Chip (SoC) such as those in K3 family AM654 SoC to communicate between various compute processors with a central system controller entity.
The system controller provides various services including the control of other compute processors within the SoC. Extend the TI-SCI protocol support to add various TI-SCI commands to invoke services associated with power and reset control, and boot vector management of the various compute processors from the Linux kernel.
Signed-off-by: Suman Anna <s-anna@ti.com> --- Hi Santosh, Nishanth, Tero,
Appreciate it if this patch can be picked up for the 5.3 merge window. This is a dependency patch for my various remoteproc drivers on TI K3 SoCs. Patch is on top of v5.2-rc1.
regards Suman
drivers/firmware/ti_sci.c | 350 +++++++++++++++++++++++++ drivers/firmware/ti_sci.h | 135 ++++++++++ include/linux/soc/ti/ti_sci_protocol.h | 31 +++ 3 files changed, 516 insertions(+)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index 36ce11a67235..596acad89e86 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -2004,6 +2004,348 @@ static int ti_sci_cmd_free_event_map(const struct ti_sci_handle *handle, ia_id, vint, global_event, vint_status_bit, 0); } +/** + * ti_sci_cmd_proc_request() - Command to request a physical processor control + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_request(const struct ti_sci_handle *handle, + u8 proc_id) +{ + struct ti_sci_msg_req_proc_request *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (!handle) + return -EINVAL; + if (IS_ERR(handle)) + return PTR_ERR(handle); + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PROC_REQUEST, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_proc_request *)xfer->xfer_buf; + req->processor_id = proc_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_proc_release() - Command to release a physical processor control + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_release(const struct ti_sci_handle *handle, + u8 proc_id) +{ + struct ti_sci_msg_req_proc_release *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (!handle) + return -EINVAL; + if (IS_ERR(handle)) + return PTR_ERR(handle); + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PROC_RELEASE, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_proc_release *)xfer->xfer_buf; + req->processor_id = proc_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_proc_handover() - Command to handover a physical processor + * control to a host in the processor's access + * control list. + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * @host_id: Host ID to get the control of the processor + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle, + u8 proc_id, u8 host_id) +{ + struct ti_sci_msg_req_proc_handover *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (!handle) + return -EINVAL; + if (IS_ERR(handle)) + return PTR_ERR(handle); + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PROC_HANDOVER, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_proc_handover *)xfer->xfer_buf; + req->processor_id = proc_id; + req->host_id = host_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_proc_set_config() - Command to set the processor boot + * configuration flags + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * @config_flags_set: Configuration flags to be set + * @config_flags_clear: Configuration flags to be cleared. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_set_config(const struct ti_sci_handle *handle, + u8 proc_id, u64 bootvector, + u32 config_flags_set, + u32 config_flags_clear) +{ + struct ti_sci_msg_req_set_config *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (!handle) + return -EINVAL; + if (IS_ERR(handle)) + return PTR_ERR(handle); + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CONFIG, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_config *)xfer->xfer_buf; + req->processor_id = proc_id; + req->bootvector_low = bootvector & TI_SCI_ADDR_LOW_MASK; + req->bootvector_high = (bootvector & TI_SCI_ADDR_HIGH_MASK) >> + TI_SCI_ADDR_HIGH_SHIFT; + req->config_flags_set = config_flags_set; + req->config_flags_clear = config_flags_clear; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_proc_set_control() - Command to set the processor boot + * control flags + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * @control_flags_set: Control flags to be set + * @control_flags_clear: Control flags to be cleared + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_set_control(const struct ti_sci_handle *handle, + u8 proc_id, u32 control_flags_set, + u32 control_flags_clear) +{ + struct ti_sci_msg_req_set_ctrl *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (!handle) + return -EINVAL; + if (IS_ERR(handle)) + return PTR_ERR(handle); + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CTRL, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_ctrl *)xfer->xfer_buf; + req->processor_id = proc_id; + req->control_flags_set = control_flags_set; + req->control_flags_clear = control_flags_clear; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_boot_status() - Command to get the processor boot status + * @handle: Pointer to TI SCI handle + * @proc_id: Processor ID this request is for + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_proc_get_status(const struct ti_sci_handle *handle, + u8 proc_id, u64 *bv, u32 *cfg_flags, + u32 *ctrl_flags, u32 *sts_flags) +{ + struct ti_sci_msg_resp_get_status *resp; + struct ti_sci_msg_req_get_status *req; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (!handle) + return -EINVAL; + if (IS_ERR(handle)) + return PTR_ERR(handle); + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_STATUS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_status *)xfer->xfer_buf; + req->processor_id = proc_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_status *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) { + ret = -ENODEV; + } else { + *bv = (resp->bootvector_low & TI_SCI_ADDR_LOW_MASK) | + (((u64)resp->bootvector_high << TI_SCI_ADDR_HIGH_SHIFT) & + TI_SCI_ADDR_HIGH_MASK); + *cfg_flags = resp->config_flags; + *ctrl_flags = resp->control_flags; + *sts_flags = resp->status_flags; + } + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + /* * ti_sci_setup_ops() - Setup the operations structures * @info: pointer to TISCI pointer @@ -2016,6 +2358,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info) struct ti_sci_clk_ops *cops = &ops->clk_ops; struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops; struct ti_sci_rm_irq_ops *iops = &ops->rm_irq_ops; + struct ti_sci_proc_ops *pops = &ops->proc_ops; core_ops->reboot_device = ti_sci_cmd_core_reboot; @@ -2055,6 +2398,13 @@ static void ti_sci_setup_ops(struct ti_sci_info *info) iops->set_event_map = ti_sci_cmd_set_event_map; iops->free_irq = ti_sci_cmd_free_irq; iops->free_event_map = ti_sci_cmd_free_event_map; + + pops->request = ti_sci_cmd_proc_request; + pops->release = ti_sci_cmd_proc_release; + pops->handover = ti_sci_cmd_proc_handover; + pops->set_config = ti_sci_cmd_proc_set_config; + pops->set_control = ti_sci_cmd_proc_set_control; + pops->get_status = ti_sci_cmd_proc_get_status; } /** diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h index 4983827151bf..557b17fea902 100644 --- a/drivers/firmware/ti_sci.h +++ b/drivers/firmware/ti_sci.h @@ -42,6 +42,14 @@ #define TI_SCI_MSG_SET_IRQ 0x1000 #define TI_SCI_MSG_FREE_IRQ 0x1001 +/* Processor Control requests */ +#define TI_SCI_MSG_PROC_REQUEST 0xc000 +#define TI_SCI_MSG_PROC_RELEASE 0xc001 +#define TI_SCI_MSG_PROC_HANDOVER 0xc005 +#define TI_SCI_MSG_SET_CONFIG 0xc100 +#define TI_SCI_MSG_SET_CTRL 0xc101 +#define TI_SCI_MSG_GET_STATUS 0xc400 + /** * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses * @type: Type of messages: One of TI_SCI_MSG* values @@ -563,4 +571,131 @@ struct ti_sci_msg_req_manage_irq { u8 secondary_host; } __packed; +/** + * struct ti_sci_msg_req_proc_request - Request a processor + * @hdr: Generic Header + * @processor_id: ID of processor being requested + * + * Request type is TI_SCI_MSG_PROC_REQUEST, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_request { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_req_proc_release - Release a processor + * @hdr: Generic Header + * @processor_id: ID of processor being released + * + * Request type is TI_SCI_MSG_PROC_RELEASE, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_release { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_req_proc_handover - Handover a processor to a host + * @hdr: Generic Header + * @processor_id: ID of processor being handed over + * @host_id: Host ID the control needs to be transferred to + * + * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_proc_handover { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u8 host_id; +} __packed; + +/* Boot Vector masks */ +#define TI_SCI_ADDR_LOW_MASK GENMASK_ULL(31, 0) +#define TI_SCI_ADDR_HIGH_MASK GENMASK_ULL(63, 32) +#define TI_SCI_ADDR_HIGH_SHIFT 32 + +/** + * struct ti_sci_msg_req_set_config - Set Processor boot configuration + * @hdr: Generic Header + * @processor_id: ID of processor being configured + * @bootvector_low: Lower 32 bit address (Little Endian) of boot vector + * @bootvector_high: Higher 32 bit address (Little Endian) of boot vector + * @config_flags_set: Optional Processor specific Config Flags to set. + * Setting a bit here implies the corresponding mode + * will be set + * @config_flags_clear: Optional Processor specific Config Flags to clear. + * Setting a bit here implies the corresponding mode + * will be cleared + * + * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_config { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 bootvector_low; + u32 bootvector_high; + u32 config_flags_set; + u32 config_flags_clear; +} __packed; + +/** + * struct ti_sci_msg_req_set_ctrl - Set Processor boot control flags + * @hdr: Generic Header + * @processor_id: ID of processor being configured + * @control_flags_set: Optional Processor specific Control Flags to set. + * Setting a bit here implies the corresponding mode + * will be set + * @control_flags_clear:Optional Processor specific Control Flags to clear. + * Setting a bit here implies the corresponding mode + * will be cleared + * + * Request type is TI_SCI_MSG_SET_CTRL, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_ctrl { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 control_flags_set; + u32 control_flags_clear; +} __packed; + +/** + * struct ti_sci_msg_req_get_status - Processor boot status request + * @hdr: Generic Header + * @processor_id: ID of processor whose status is being requested + * + * Request type is TI_SCI_MSG_GET_STATUS, response is an appropriate + * message, or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_get_status { + struct ti_sci_msg_hdr hdr; + u8 processor_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_status - Processor boot status response + * @hdr: Generic Header + * @processor_id: ID of processor whose status is returned + * @bootvector_low: Lower 32 bit address (Little Endian) of boot vector + * @bootvector_high: Higher 32 bit address (Little Endian) of boot vector + * @config_flags: Optional Processor specific Config Flags set currently + * @control_flags: Optional Processor specific Control Flags set currently + * @status_flags: Optional Processor specific Status Flags set currently + * + * Response structure to a TI_SCI_MSG_GET_STATUS request. + */ +struct ti_sci_msg_resp_get_status { + struct ti_sci_msg_hdr hdr; + u8 processor_id; + u32 bootvector_low; + u32 bootvector_high; + u32 config_flags; + u32 control_flags; + u32 status_flags; +} __packed; + #endif /* __TI_SCI_H */ diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h index 568722a041bf..0e3cd739add5 100644 --- a/include/linux/soc/ti/ti_sci_protocol.h +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -241,12 +241,42 @@ struct ti_sci_rm_irq_ops { u16 global_event, u8 vint_status_bit); }; +/** + * struct ti_sci_proc_ops - Processor Control operations + * @request: Request to control a physical processor. The requesting host + * should be in the processor access list + * @release: Relinquish a physical processor control + * @handover: Handover a physical processor control to another host + * in the permitted list + * @set_config: Set base configuration of a processor + * @set_control: Setup limited control flags in specific cases + * @get_status: Get the state of physical processor + * + * NOTE: The following paramteres are generic in nature for all these ops, + * -handle: Pointer to TI SCI handle as retrieved by *ti_sci_get_handle + * -pid: Processor ID + * -hid: Host ID + */ +struct ti_sci_proc_ops { + int (*request)(const struct ti_sci_handle *handle, u8 pid); + int (*release)(const struct ti_sci_handle *handle, u8 pid); + int (*handover)(const struct ti_sci_handle *handle, u8 pid, u8 hid); + int (*set_config)(const struct ti_sci_handle *handle, u8 pid, + u64 boot_vector, u32 cfg_set, u32 cfg_clr); + int (*set_control)(const struct ti_sci_handle *handle, u8 pid, + u32 ctrl_set, u32 ctrl_clr); + int (*get_status)(const struct ti_sci_handle *handle, u8 pid, + u64 *boot_vector, u32 *cfg_flags, u32 *ctrl_flags, + u32 *status_flags); +}; + /** * struct ti_sci_ops - Function support for TI SCI * @dev_ops: Device specific operations * @clk_ops: Clock specific operations * @rm_core_ops: Resource management core operations. * @rm_irq_ops: IRQ management specific operations + * @proc_ops: Processor Control specific operations */ struct ti_sci_ops { struct ti_sci_core_ops core_ops; @@ -254,6 +284,7 @@ struct ti_sci_ops { struct ti_sci_clk_ops clk_ops; struct ti_sci_rm_core_ops rm_core_ops; struct ti_sci_rm_irq_ops rm_irq_ops; + struct ti_sci_proc_ops proc_ops; }; /** -- 2.21.0
| |