[lkml]   [2019]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 3/4] ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family
Hi Anand,

On 2019-06-23 18:02, Anand Moon wrote:
> Thanks for this patch. Please add my
> Tested-by: Anand Moon <>
> [snip]
> Could you integrate below small changes into this patch.
> with these below changes suspend and resume work correctly at my end.
> [1] XU4_suspendresume.patch
> As per S2MPS11B PMIC 1.2.1 Regulator (Features)
> Fix the min max value for *Buck7* and *Buck8*
> -- Buck7 (VDD_1.0V_LDO) 1.5 A (1.2 V to 1.5 V, 12.5 mV step, default on 1.35 V)
> -- Buck8 (VDD_1.8V_LDO) 2.5 A (1.8 V to 2.1 V, 12.5 mV step, default on 2.0 V)

Could you elaborate why such change for Buck7 and Buck8 is needed?

> Also add suspend-off for *Buck9*
> Buck9 internally controls the power of USB hub.
> Adding suspend the this node help proper reset of USB hub on Odroid
> XU4 / HC1/ XU3
> during suspend and resume. Below it the logs from my testing.

Disabling Buck9 in suspend indeed reduces the power consumed by the
board during suspend-to-ram from about 80mA to as little as 7-10mA, what
matches the results of OdroidXU3. Thanks for the hint!

Best regards
Marek Szyprowski, PhD
Samsung R&D Institute Poland

 \ /
  Last update: 2019-06-24 09:21    [W:0.070 / U:3.984 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site