Messages in this thread | | | From | yibin.gong@nxp ... | Subject | [PATCH v4 0/6] add edma2 for i.mx7ulp | Date | Fri, 14 Jun 2019 16:17:18 +0800 |
| |
From: Robin Gong <yibin.gong@nxp.com>
This patch set add new version of edma for i.mx7ulp, the main changes are as belows: 1. only one dmamux. 2. another clock dma_clk except dmamux clk. 3. 16 independent interrupts instead of only one interrupt for all channels For the first change, need modify fsl-edma-common.c and mcf-edma, so create the first two patches to prepare without any function impact.
For the third change, need request single irq for every channel with the legacy handler. But actually 2 dma channels share one interrupt(16 channel interrupts, but 32 channels.),ch0/ch16,ch1/ch17... For now, just simply request irq without IRQF_SHARED flag, since 16 channels are enough on i.mx7ulp whose M4 domain own some peripherals.
change from v1: 1. check .data of 'of_device_id' in probe instead of compatible name.
change from v2: 1. move the difference between edma and edma2 into driver data so that no need version checking in fsl-edma.c.
change from v3: 1. remove duplicated 'version' and 'dmamux_nr' in 'struct fsl_edma_engine' since they are included in drvdata already. 2. downgrade print log level. 3. address some minor indent issues raised by Vinod.
Robin Gong (6): dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma-common: version check for v2 instead dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma: add i.mx7ulp edma2 version support ARM: dts: imx7ulp: add edma device node
Documentation/devicetree/bindings/dma/fsl-edma.txt | 44 ++++++++- arch/arm/boot/dts/imx7ulp.dtsi | 28 ++++++ drivers/dma/fsl-edma-common.c | 83 ++++++++++------ drivers/dma/fsl-edma-common.h | 14 ++- drivers/dma/fsl-edma.c | 109 ++++++++++++++++++--- drivers/dma/mcf-edma.c | 11 ++- 6 files changed, 239 insertions(+), 50 deletions(-)
-- 2.7.4
| |