lkml.org 
[lkml]   [2019]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3 v6] serial: 8250: Add MSR/MCR TIOCM conversion wrapper functions
On Thu, Jun 13, 2019 at 05:45:41PM +0200, Stefan Roese wrote:
> This patch adds wrapper functions to convert MSR <-> TIOCM and also
> MCR <-> TIOCM. These functions are used now in serial8250_do_set_mctrl()
> and serial8250_do_get_mctrl().
>

Yes, and we may use them in the other drivers later on.
Thanks!

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Stefan Roese <sr@denx.de>
> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Yegor Yefremov <yegorslists@googlemail.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com>
> ---
> v6:
> - New patch
>
> drivers/tty/serial/8250/8250.h | 54 +++++++++++++++++++++++++++++
> drivers/tty/serial/8250/8250_port.c | 25 ++-----------
> 2 files changed, 57 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
> index ebfb0bd5bef5..793da2e510e0 100644
> --- a/drivers/tty/serial/8250/8250.h
> +++ b/drivers/tty/serial/8250/8250.h
> @@ -139,6 +139,60 @@ void serial8250_rpm_put_tx(struct uart_8250_port *p);
> int serial8250_em485_init(struct uart_8250_port *p);
> void serial8250_em485_destroy(struct uart_8250_port *p);
>
> +/* MCR <-> TIOCM conversion */
> +static inline int serial8250_TIOCM_to_MCR(int tiocm)
> +{
> + int mcr = 0;
> +
> + if (tiocm & TIOCM_RTS)
> + mcr |= UART_MCR_RTS;
> + if (tiocm & TIOCM_DTR)
> + mcr |= UART_MCR_DTR;
> + if (tiocm & TIOCM_OUT1)
> + mcr |= UART_MCR_OUT1;
> + if (tiocm & TIOCM_OUT2)
> + mcr |= UART_MCR_OUT2;
> + if (tiocm & TIOCM_LOOP)
> + mcr |= UART_MCR_LOOP;
> +
> + return mcr;
> +}
> +
> +static inline int serial8250_MCR_to_TIOCM(int mcr)
> +{
> + int tiocm = 0;
> +
> + if (mcr & UART_MCR_RTS)
> + tiocm |= TIOCM_RTS;
> + if (mcr & UART_MCR_DTR)
> + tiocm |= TIOCM_DTR;
> + if (mcr & UART_MCR_OUT1)
> + tiocm |= TIOCM_OUT1;
> + if (mcr & UART_MCR_OUT2)
> + tiocm |= TIOCM_OUT2;
> + if (mcr & UART_MCR_LOOP)
> + tiocm |= TIOCM_LOOP;
> +
> + return tiocm;
> +}
> +
> +/* MSR <-> TIOCM conversion */
> +static inline int serial8250_MSR_to_TIOCM(int msr)
> +{
> + int tiocm = 0;
> +
> + if (msr & UART_MSR_DCD)
> + tiocm |= TIOCM_CAR;
> + if (msr & UART_MSR_RI)
> + tiocm |= TIOCM_RNG;
> + if (msr & UART_MSR_DSR)
> + tiocm |= TIOCM_DSR;
> + if (msr & UART_MSR_CTS)
> + tiocm |= TIOCM_CTS;
> +
> + return tiocm;
> +}
> +
> static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
> {
> serial_out(up, UART_MCR, value);
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 2304a84eee3b..47f0a8d01a57 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -1944,22 +1944,12 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port)
> {
> struct uart_8250_port *up = up_to_u8250p(port);
> unsigned int status;
> - unsigned int ret;
>
> serial8250_rpm_get(up);
> status = serial8250_modem_status(up);
> serial8250_rpm_put(up);
>
> - ret = 0;
> - if (status & UART_MSR_DCD)
> - ret |= TIOCM_CAR;
> - if (status & UART_MSR_RI)
> - ret |= TIOCM_RNG;
> - if (status & UART_MSR_DSR)
> - ret |= TIOCM_DSR;
> - if (status & UART_MSR_CTS)
> - ret |= TIOCM_CTS;
> - return ret;
> + return serial8250_MSR_to_TIOCM(status);
> }
> EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl);
>
> @@ -1973,18 +1963,9 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
> void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
> {
> struct uart_8250_port *up = up_to_u8250p(port);
> - unsigned char mcr = 0;
> + unsigned char mcr;
>
> - if (mctrl & TIOCM_RTS)
> - mcr |= UART_MCR_RTS;
> - if (mctrl & TIOCM_DTR)
> - mcr |= UART_MCR_DTR;
> - if (mctrl & TIOCM_OUT1)
> - mcr |= UART_MCR_OUT1;
> - if (mctrl & TIOCM_OUT2)
> - mcr |= UART_MCR_OUT2;
> - if (mctrl & TIOCM_LOOP)
> - mcr |= UART_MCR_LOOP;
> + mcr = serial8250_TIOCM_to_MCR(mctrl);
>
> mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
>
> --
> 2.22.0
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2019-06-13 19:09    [W:0.175 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site