lkml.org 
[lkml]   [2019]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3 v6] tty/serial/8250: use mctrl_gpio helpers
On Thu, Jun 13, 2019 at 05:45:42PM +0200, Stefan Roese wrote:
> From: Yegor Yefremov <yegorslists@googlemail.com>
>
> This patch permits the usage for GPIOs to control
> the CTS/RTS/DTR/DSR/DCD/RI signals.
>
> Changed by Stefan:
> Only call mctrl_gpio_init(), if the device has no ACPI companion device
> to not break existing ACPI based systems. Also only use the mctrl_gpio_
> functions when "gpios" is available.
>
> Use MSR / MCR <-> TIOCM wrapper functions.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

I'm a bit busy now, but I will try to find a time to actually test this on some
affected machines.

>
> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com>
> Cc: Yegor Yefremov <yegorslists@googlemail.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> v6:
> - Use newly introduced TIOCM <-> MCR/MSR wrapper functions
> - serial8250_in_MCR(): Don't save the already read MCR bits in TIOCM
> format but "or" them later to the GPIO MCR value
> - Correctly use "!up->gpios" (Andy)
> - Removed Mika's reviewed by tag (because of changes)
>
> v5:
> - Dropped a few "if (up->gpios)" checks, as the mctrl_gpio_foo() API
> handles gpios == NULL (return)
> - 8250_omap: Changed "IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios, ...))"
> to "up->gpios == NULL", as mctrl_gpio_to_gpiod() does not handle
> gpios == NULL correctly.
>
> v4:
> - Added Mika's reviewed by tag
> - Added Johan to Cc
>
> v3:
> - Only call mctrl_gpio_init(), if the device has no ACPI companion device
> to not break existing ACPI based systems, as suggested by Andy
>
> v2:
> - No change
>
> Please note that this patch was already applied before [1]. And later
> reverted [2] because it introduced problems on some x86 based boards
> (ACPI GPIO related). Here a detailed description of the issue at that
> time:
>
> https://lkml.org/lkml/2016/8/9/357
> http://www.spinics.net/lists/linux-serial/msg23071.html
>
> This is a re-send of the original patch that was applied at that time.
> With patch 1/2 from this series this issue should be fixed now (please
> note that I can't test it on such an x86 platform causing these
> problems).
>
> Andy (or Mika), perhaps it would be possible for you to test this
> patch again, now with patch 1/2 of this series applied as well?
> That would be really helpful.
>
> Thanks,
> Stefan
>
> [1] 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers")
> [2] 5db4f7f80d16 ("Revert "tty/serial/8250: use mctrl_gpio helpers"")
>
> .../devicetree/bindings/serial/8250.txt | 19 ++++++++++++
> drivers/tty/serial/8250/8250.h | 18 +++++++++++-
> drivers/tty/serial/8250/8250_core.c | 17 +++++++++++
> drivers/tty/serial/8250/8250_omap.c | 29 ++++++++++---------
> drivers/tty/serial/8250/8250_port.c | 8 +++++
> drivers/tty/serial/8250/Kconfig | 1 +
> include/linux/serial_8250.h | 1 +
> 7 files changed, 79 insertions(+), 14 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
> index 3cba12f855b7..20d351f268ef 100644
> --- a/Documentation/devicetree/bindings/serial/8250.txt
> +++ b/Documentation/devicetree/bindings/serial/8250.txt
> @@ -53,6 +53,9 @@ Optional properties:
> programmable TX FIFO thresholds.
> - resets : phandle + reset specifier pairs
> - overrun-throttle-ms : how long to pause uart rx when input overrun is encountered.
> +- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
> + line respectively. It will use specified GPIO instead of the peripheral
> + function pin for the UART feature. If unsure, don't specify this property.
>
> Note:
> * fsl,ns16550:
> @@ -74,3 +77,19 @@ Example:
> interrupts = <10>;
> reg-shift = <2>;
> };
> +
> +Example for OMAP UART using GPIO-based modem control signals:
> +
> + uart4: serial@49042000 {
> + compatible = "ti,omap3-uart";
> + reg = <0x49042000 0x400>;
> + interrupts = <80>;
> + ti,hwmods = "uart4";
> + clock-frequency = <48000000>;
> + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
> + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
> + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
> + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> + };
> diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
> index 793da2e510e0..75c7c5449461 100644
> --- a/drivers/tty/serial/8250/8250.h
> +++ b/drivers/tty/serial/8250/8250.h
> @@ -11,6 +11,8 @@
> #include <linux/serial_reg.h>
> #include <linux/dmaengine.h>
>
> +#include "../serial_mctrl_gpio.h"
> +
> struct uart_8250_dma {
> int (*tx_dma)(struct uart_8250_port *p);
> int (*rx_dma)(struct uart_8250_port *p);
> @@ -196,11 +198,25 @@ static inline int serial8250_MSR_to_TIOCM(int msr)
> static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
> {
> serial_out(up, UART_MCR, value);
> +
> + if (up->gpios)
> + mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value));
> }
>
> static inline int serial8250_in_MCR(struct uart_8250_port *up)
> {
> - return serial_in(up, UART_MCR);
> + int mctrl;
> +
> + mctrl = serial_in(up, UART_MCR);
> +
> + if (up->gpios) {
> + unsigned int mctrl_gpio = 0;
> +
> + mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
> + mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio);
> + }
> +
> + return mctrl;
> }
>
> #if defined(__alpha__) && !defined(CONFIG_PCI)
> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> index e441221e04b9..a4470771005f 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -14,6 +14,7 @@
> * serial8250_register_8250_port() ports
> */
>
> +#include <linux/acpi.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> #include <linux/ioport.h>
> @@ -982,6 +983,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
>
> uart = serial8250_find_match_or_unused(&up->port);
> if (uart && uart->port.type != PORT_8250_CIR) {
> + struct mctrl_gpios *gpios;
> +
> if (uart->port.dev)
> uart_remove_one_port(&serial8250_reg, &uart->port);
>
> @@ -1016,6 +1019,20 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
> if (up->port.flags & UPF_FIXED_TYPE)
> uart->port.type = up->port.type;
>
> + /*
> + * Only call mctrl_gpio_init(), if the device has no ACPI
> + * companion device
> + */
> + if (!has_acpi_companion(uart->port.dev)) {
> + gpios = mctrl_gpio_init(&uart->port, 0);
> + if (IS_ERR(gpios)) {
> + if (PTR_ERR(gpios) != -ENOSYS)
> + return PTR_ERR(gpios);
> + } else {
> + uart->gpios = gpios;
> + }
> + }
> +
> serial8250_set_defaults(uart);
>
> /* Possibly override default I/O functions. */
> diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
> index 0a8316632d75..d5bbfc8f2284 100644
> --- a/drivers/tty/serial/8250/8250_omap.c
> +++ b/drivers/tty/serial/8250/8250_omap.c
> @@ -141,18 +141,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
>
> serial8250_do_set_mctrl(port, mctrl);
>
> - /*
> - * Turn off autoRTS if RTS is lowered and restore autoRTS setting
> - * if RTS is raised
> - */
> - lcr = serial_in(up, UART_LCR);
> - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
> - if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
> - priv->efr |= UART_EFR_RTS;
> - else
> - priv->efr &= ~UART_EFR_RTS;
> - serial_out(up, UART_EFR, priv->efr);
> - serial_out(up, UART_LCR, lcr);
> + if (!up->gpios) {
> + /*
> + * Turn off autoRTS if RTS is lowered and restore autoRTS
> + * setting if RTS is raised
> + */
> + lcr = serial_in(up, UART_LCR);
> + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
> + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
> + priv->efr |= UART_EFR_RTS;
> + else
> + priv->efr &= ~UART_EFR_RTS;
> + serial_out(up, UART_EFR, priv->efr);
> + serial_out(up, UART_LCR, lcr);
> + }
> }
>
> /*
> @@ -453,7 +455,8 @@ static void omap_8250_set_termios(struct uart_port *port,
> priv->efr = 0;
> up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
>
> - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
> + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW &&
> + !up->gpios) {
> /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
> up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
> priv->efr |= UART_EFR_CTS;
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 47f0a8d01a57..bc4a5e7f7f63 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -1662,6 +1662,8 @@ static void serial8250_disable_ms(struct uart_port *port)
> if (up->bugs & UART_BUG_NOMSR)
> return;
>
> + mctrl_gpio_disable_ms(up->gpios);
> +
> up->ier &= ~UART_IER_MSI;
> serial_port_out(port, UART_IER, up->ier);
> }
> @@ -1674,6 +1676,8 @@ static void serial8250_enable_ms(struct uart_port *port)
> if (up->bugs & UART_BUG_NOMSR)
> return;
>
> + mctrl_gpio_enable_ms(up->gpios);
> +
> up->ier |= UART_IER_MSI;
>
> serial8250_rpm_get(up);
> @@ -1944,11 +1948,15 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port)
> {
> struct uart_8250_port *up = up_to_u8250p(port);
> unsigned int status;
> + unsigned int val = 0;
>
> serial8250_rpm_get(up);
> status = serial8250_modem_status(up);
> serial8250_rpm_put(up);
>
> + if (up->gpios)
> + return mctrl_gpio_get(up->gpios, &val);
> +
> return serial8250_MSR_to_TIOCM(status);
> }
> EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl);
> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
> index 296115f6a4d8..509f6a3bb9ff 100644
> --- a/drivers/tty/serial/8250/Kconfig
> +++ b/drivers/tty/serial/8250/Kconfig
> @@ -8,6 +8,7 @@ config SERIAL_8250
> tristate "8250/16550 and compatible serial support"
> depends on !S390
> select SERIAL_CORE
> + select SERIAL_MCTRL_GPIO if GPIOLIB
> ---help---
> This selects whether you want to include the driver for the standard
> serial ports. The standard answer is Y. People who might say N
> diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
> index 5e0b59422a68..bb2bc99388ca 100644
> --- a/include/linux/serial_8250.h
> +++ b/include/linux/serial_8250.h
> @@ -110,6 +110,7 @@ struct uart_8250_port {
> * if no_console_suspend
> */
> unsigned char probe;
> + struct mctrl_gpios *gpios;
> #define UART_PROBE_RSA (1 << 0)
>
> /*
> --
> 2.22.0
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2019-06-13 19:15    [W:0.109 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site