lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] dt-bindings: usb: mtk-xhci: add an optional xhci_ck clock
Date
Add a new optional clock xhci_ck

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 266c2d917a28..91c0704b586b 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -29,6 +29,7 @@ Required properties:
"sys_ck": controller clock used by normal mode,
the following ones are optional:
"ref_ck": reference clock used by low power mode etc,
+ "xhci_ck": controller clock,
"mcu_ck": mcu_bus clock for register access,
"dma_ck": dma_bus clock for data transfer by DMA

@@ -100,7 +101,7 @@ Required properties:
- clocks : a list of phandle + clock-specifier pairs, one for each
entry in clock-names
- clock-names : must contain "sys_ck", and the following ones are optional:
- "ref_ck", "mcu_ck" and "dma_ck"
+ "ref_ck", "xhci_ck", "mcu_ck" and "dma_ck"

Optional properties:
- vbus-supply : reference to the VBUS regulator;
--
2.21.0
\
 
 \ /
  Last update: 2019-06-12 07:56    [W:1.271 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site