lkml.org 
[lkml]   [2019]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] dt-bindings: usb: mtu3: support force_vbus mode
Date
Add a new property to indicate that the controller doesn't support Vbus
detection due to non-exist Vbus PIN, and the driver should set force_vbus
state for device mode

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 5d740e9d4525..c13cc8642154 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -52,6 +52,8 @@ Optional properties:
- 2 : used by mt2712 etc
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
+ - mediatek,force-vbus : boolean, indicates that the controller doesn't support
+ Vbus detection due to non-exist Vbus PIN.

additionally the properties from usb-hcd.txt (in the current directory) are
supported.
--
2.21.0
\
 
 \ /
  Last update: 2019-06-12 07:56    [W:0.031 / U:91.756 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site