lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/7] scsi: NCR5380: Always re-enable reselection interrupt
On Tue, 11 Jun 2019, Michael Schmitz wrote:

> Hi Finn,
>
> IIRC I'd tested that change as well - didn't change broken target
> behaviour but no regressions in other respects. Add my tested-by if
> needed.
>

Unfortunately I can't confirm that this is the same patch as the one you
tested as I no longer have that commit. But Stan did test a wide variety
of targets and I'm confident that the reselection code path was covered.

--

> Cheers,
>
> Michael
>
>
> Am 09.06.2019 um 13:19 schrieb Finn Thain:
> > The reselection interrupt gets disabled during selection and must be
> > re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled
> > a disconnected command may time-out or the target may wedge the bus while
> > trying to reselect the host. This can happen after a command is aborted.
> >
> > Fix this by enabling the reselection interrupt in NCR5380_main() after
> > calls to NCR5380_select() and NCR5380_information_transfer() return.
> >
> > Cc: Michael Schmitz <schmitzmic@gmail.com>
> > Cc: stable@vger.kernel.org # v4.9+
> > Fixes: 8b00c3d5d40d ("ncr5380: Implement new eh_abort_handler")
> > Tested-by: Stan Johnson <userm57@yahoo.com>
> > Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
> > ---
> > drivers/scsi/NCR5380.c | 12 ++----------
> > 1 file changed, 2 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> > index fe0535affc14..08e3ea8159b3 100644
> > --- a/drivers/scsi/NCR5380.c
> > +++ b/drivers/scsi/NCR5380.c
> > @@ -709,6 +709,8 @@ static void NCR5380_main(struct work_struct *work)
> > NCR5380_information_transfer(instance);
> > done = 0;
> > }
> > + if (!hostdata->connected)
> > + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> > spin_unlock_irq(&hostdata->lock);
> > if (!done)
> > cond_resched();
> > @@ -1110,8 +1112,6 @@ static bool NCR5380_select(struct Scsi_Host *instance,
> > struct scsi_cmnd *cmd)
> > spin_lock_irq(&hostdata->lock);
> > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> > NCR5380_reselect(instance);
> > - if (!hostdata->connected)
> > - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> > shost_printk(KERN_ERR, instance, "reselection after won
> > arbitration?\n");
> > goto out;
> > }
> > @@ -1119,7 +1119,6 @@ static bool NCR5380_select(struct Scsi_Host *instance,
> > struct scsi_cmnd *cmd)
> > if (err < 0) {
> > spin_lock_irq(&hostdata->lock);
> > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> > - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> >
> > /* Can't touch cmd if it has been reclaimed by the scsi ML */
> > if (!hostdata->selecting)
> > @@ -1157,7 +1156,6 @@ static bool NCR5380_select(struct Scsi_Host *instance,
> > struct scsi_cmnd *cmd)
> > if (err < 0) {
> > shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
> > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> > - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> > goto out;
> > }
> > if (!hostdata->selecting) {
> > @@ -1826,9 +1824,6 @@ static void NCR5380_information_transfer(struct
> > Scsi_Host *instance)
> > */
> > NCR5380_write(TARGET_COMMAND_REG, 0);
> >
> > - /* Enable reselect interrupts */
> > - NCR5380_write(SELECT_ENABLE_REG,
> > hostdata->id_mask);
> > -
> > maybe_release_dma_irq(instance);
> > return;
> > case MESSAGE_REJECT:
> > @@ -1860,8 +1855,6 @@ static void NCR5380_information_transfer(struct
> > Scsi_Host *instance)
> > */
> > NCR5380_write(TARGET_COMMAND_REG, 0);
> >
> > - /* Enable reselect interrupts */
> > - NCR5380_write(SELECT_ENABLE_REG,
> > hostdata->id_mask);
> > #ifdef SUN3_SCSI_VME
> > dregs->csr |= CSR_DMA_ENABLE;
> > #endif
> > @@ -1964,7 +1957,6 @@ static void NCR5380_information_transfer(struct
> > Scsi_Host *instance)
> > cmd->result = DID_ERROR << 16;
> > complete_cmd(instance, cmd);
> > maybe_release_dma_irq(instance);
> > - NCR5380_write(SELECT_ENABLE_REG,
> > hostdata->id_mask);
> > return;
> > }
> > msgout = NOP;
> >
>

\
 
 \ /
  Last update: 2019-06-11 11:34    [W:0.074 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site