lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/7] scsi: NCR5380: Always re-enable reselection interrupt
From
Date
Hi Finn,

IIRC I'd tested that change as well - didn't change broken target
behaviour but no regressions in other respects. Add my tested-by if needed.

Cheers,

Michael


Am 09.06.2019 um 13:19 schrieb Finn Thain:
> The reselection interrupt gets disabled during selection and must be
> re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled
> a disconnected command may time-out or the target may wedge the bus while
> trying to reselect the host. This can happen after a command is aborted.
>
> Fix this by enabling the reselection interrupt in NCR5380_main() after
> calls to NCR5380_select() and NCR5380_information_transfer() return.
>
> Cc: Michael Schmitz <schmitzmic@gmail.com>
> Cc: stable@vger.kernel.org # v4.9+
> Fixes: 8b00c3d5d40d ("ncr5380: Implement new eh_abort_handler")
> Tested-by: Stan Johnson <userm57@yahoo.com>
> Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
> ---
> drivers/scsi/NCR5380.c | 12 ++----------
> 1 file changed, 2 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> index fe0535affc14..08e3ea8159b3 100644
> --- a/drivers/scsi/NCR5380.c
> +++ b/drivers/scsi/NCR5380.c
> @@ -709,6 +709,8 @@ static void NCR5380_main(struct work_struct *work)
> NCR5380_information_transfer(instance);
> done = 0;
> }
> + if (!hostdata->connected)
> + NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> spin_unlock_irq(&hostdata->lock);
> if (!done)
> cond_resched();
> @@ -1110,8 +1112,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
> spin_lock_irq(&hostdata->lock);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> NCR5380_reselect(instance);
> - if (!hostdata->connected)
> - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n");
> goto out;
> }
> @@ -1119,7 +1119,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
> if (err < 0) {
> spin_lock_irq(&hostdata->lock);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
>
> /* Can't touch cmd if it has been reclaimed by the scsi ML */
> if (!hostdata->selecting)
> @@ -1157,7 +1156,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
> if (err < 0) {
> shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> goto out;
> }
> if (!hostdata->selecting) {
> @@ -1826,9 +1824,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
> */
> NCR5380_write(TARGET_COMMAND_REG, 0);
>
> - /* Enable reselect interrupts */
> - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> -
> maybe_release_dma_irq(instance);
> return;
> case MESSAGE_REJECT:
> @@ -1860,8 +1855,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
> */
> NCR5380_write(TARGET_COMMAND_REG, 0);
>
> - /* Enable reselect interrupts */
> - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> #ifdef SUN3_SCSI_VME
> dregs->csr |= CSR_DMA_ENABLE;
> #endif
> @@ -1964,7 +1957,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
> cmd->result = DID_ERROR << 16;
> complete_cmd(instance, cmd);
> maybe_release_dma_irq(instance);
> - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> return;
> }
> msgout = NOP;
>

\
 
 \ /
  Last update: 2019-06-11 07:07    [W:1.383 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site