lkml.org 
[lkml]   [2019]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] powerpc: dts: Fix the bug that intx interrupt not work in P1010RDB-PB
Date
Due to the INTA is shared with the active-low PHY2 interrupt on P1010RDB-PA
board, so configure P1010RDB-PA's INTA with polarity as active-low, the
P1010RDB-PB board is used separately, so configure P1010RDB-PB's INTA with
polarity as active-high.
The INTX in P1010RDB-PB do not work because of the pcie@0 node fixup will be
overwrited by p1010si-post.dtsi file, so we move the pcie@0 node fixup to
p1010rdb-pb.dts and p1010rdb-pb_36b.dts.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts | 16 ++++++++++++++++
arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts | 16 ++++++++++++++++
arch/powerpc/boot/dts/fsl/p1010rdb.dtsi | 16 ----------------
3 files changed, 32 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
index 37681fd..6d75e5f 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
@@ -33,3 +33,19 @@
};

/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
index 4cf255f..8359035 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
@@ -56,3 +56,19 @@
};

/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index 2ca9cee..ef49a7d 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -215,19 +215,3 @@
phy-connection-type = "sgmii";
};
};
-
-&pci0 {
- pcie@0 {
- interrupt-map = <
- /* IDSEL 0x0 */
- /*
- *irq[4:5] are active-high
- *irq[6:7] are active-low
- */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
- 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
- >;
- };
-};
--
1.7.1
\
 
 \ /
  Last update: 2019-05-20 08:02    [W:1.379 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site