lkml.org 
[lkml]   [2019]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] rtc: test: enable wakeup flags
Date
From: Roman Stratiienko <roman.stratiienko@globallogic.com>

Alarmtimer interface uses only the RTC with wekeup flags enabled.
Allow to use rtc-test driver with alarmtimer interface.

Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>

---
Changes in v2:

Wakeup flags applied only for the RTCs with alarm support

drivers/rtc/rtc-test.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index 6c5f09c815e8..473bbb30bc1c 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -133,6 +133,7 @@ static int test_probe(struct platform_device *plat_dev)
break;
default:
rtd->rtc->ops = &test_rtc_ops;
+ device_init_wakeup(&plat_dev->dev, 1);
}

timer_setup(&rtd->alarm, test_rtc_alarm_handler, 0);
--
2.17.1
\
 
 \ /
  Last update: 2019-05-15 16:21    [W:0.043 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site