[lkml]   [2019]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/5] PCIE support for i.MX8MQ (DT changes)

This series contains all of the i.MX Device Tree changes I made to
enable support of PCIe on i.MX8MQ EVK.

Feedback is welcome!

Changes since [v3]:

- Added "num-viewport" to PCIE nodes in "arm64: dts: imx8mq: Add
nodes for PCIe IP blocks"

- Rebased on latest for-next of i.MX tree

- Collected Reviewed-by from Lucas for "arm64: dts: imx8mq-evk:
Enable PCIE0 interface"

Changes since [v2]:

- Fixed various nits pointed out by Lucas

- Collected Acked-by and Reviewed-by from Lucas

- Moved EVK's WiFi reset pin configuration into a separate pinmux

Changes since [v1]:

- Dropped unsupported IRQ from PCIe nodes (a leftover from vendor tree)

- Added "pcie_aux" clock and moved clock configuration to board
file since "pcie_bus" clock is now board specific

Andrey Smirnov


Andrey Smirnov (5):
arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible
arm64: dts: imx8mq: Add a node for SRC IP block
arm64: dts: imx8mq: Combine PCIE power domains
arm64: dts: imx8mq: Add nodes for PCIe IP blocks
arm64: dts: imx8mq-evk: Enable PCIE0 interface

arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 42 ++++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 87 +++++++++++++++++++-
2 files changed, 127 insertions(+), 2 deletions(-)


 \ /
  Last update: 2019-04-01 04:25    [W:0.059 / U:0.160 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site