lkml.org 
[lkml]   [2019]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/11] regulator: pv88080: Convert to use regulator_set/get_current_limit_regmap
Date
Use regulator_set/get_current_limit_regmap helpers to save some code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/pv88080-regulator.c | 55 ++++-----------------------
1 file changed, 8 insertions(+), 47 deletions(-)

diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
index 6770e4de2097..bdddacdbeb99 100644
--- a/drivers/regulator/pv88080-regulator.c
+++ b/drivers/regulator/pv88080-regulator.c
@@ -45,12 +45,7 @@ enum pv88080_types {

struct pv88080_regulator {
struct regulator_desc desc;
- /* Current limiting */
- unsigned int n_current_limits;
- const int *current_limits;
- unsigned int limit_mask;
unsigned int mode_reg;
- unsigned int limit_reg;
unsigned int conf2;
unsigned int conf5;
};
@@ -102,11 +97,11 @@ static const struct regmap_config pv88080_regmap_config = {
* Entry indexes corresponds to register values.
*/

-static const int pv88080_buck1_limits[] = {
+static const unsigned int pv88080_buck1_limits[] = {
3230000, 5130000, 6960000, 8790000
};

-static const int pv88080_buck23_limits[] = {
+static const unsigned int pv88080_buck23_limits[] = {
1496000, 2393000, 3291000, 4189000
};

@@ -272,40 +267,6 @@ static int pv88080_buck_set_mode(struct regulator_dev *rdev,
PV88080_BUCK1_MODE_MASK, val);
}

-static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
- int max)
-{
- struct pv88080_regulator *info = rdev_get_drvdata(rdev);
- int i;
-
- /* search for closest to maximum */
- for (i = info->n_current_limits - 1; i >= 0; i--) {
- if (min <= info->current_limits[i]
- && max >= info->current_limits[i]) {
- return regmap_update_bits(rdev->regmap,
- info->limit_reg,
- info->limit_mask,
- i << PV88080_BUCK1_ILIM_SHIFT);
- }
- }
-
- return -EINVAL;
-}
-
-static int pv88080_get_current_limit(struct regulator_dev *rdev)
-{
- struct pv88080_regulator *info = rdev_get_drvdata(rdev);
- unsigned int data;
- int ret;
-
- ret = regmap_read(rdev->regmap, info->limit_reg, &data);
- if (ret < 0)
- return ret;
-
- data = (data & info->limit_mask) >> PV88080_BUCK1_ILIM_SHIFT;
- return info->current_limits[data];
-}
-
static const struct regulator_ops pv88080_buck_ops = {
.get_mode = pv88080_buck_get_mode,
.set_mode = pv88080_buck_set_mode,
@@ -315,8 +276,8 @@ static const struct regulator_ops pv88080_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
- .set_current_limit = pv88080_set_current_limit,
- .get_current_limit = pv88080_get_current_limit,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
};

static const struct regulator_ops pv88080_hvbuck_ops = {
@@ -341,9 +302,9 @@ static const struct regulator_ops pv88080_hvbuck_ops = {
.min_uV = min, \
.uV_step = step, \
.n_voltages = ((max) - (min))/(step) + 1, \
+ .curr_table = limits_array, \
+ .n_current_limits = ARRAY_SIZE(limits_array), \
},\
- .current_limits = limits_array, \
- .n_current_limits = ARRAY_SIZE(limits_array), \
}

#define PV88080_HVBUCK(chip, regl_name, min, step, max) \
@@ -521,9 +482,9 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
if (init_data)
config.init_data = &init_data[i];

- pv88080_regulator_info[i].limit_reg
+ pv88080_regulator_info[i].desc.csel_reg
= regmap_config->buck_regmap[i].buck_limit_reg;
- pv88080_regulator_info[i].limit_mask
+ pv88080_regulator_info[i].desc.csel_mask
= regmap_config->buck_regmap[i].buck_limit_mask;
pv88080_regulator_info[i].mode_reg
= regmap_config->buck_regmap[i].buck_mode_reg;
--
2.17.1
\
 
 \ /
  Last update: 2019-02-28 14:41    [W:0.134 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site