Messages in this thread | | | From | Marc Gonzalez <> | Subject | [PATCH v5 0/3] UFS on APQ8098/MSM8998 | Date | Mon, 25 Feb 2019 13:16:27 +0100 |
| |
Hello,
This series adds support for the UFS host controller on APQ8098/MSM8998-based boards.
This should be the final rev ;-)
Differences between v4 and v5: - Drop patches that have already been accepted or spun off
Differences between v3 and v4: - Rebase on top of -next - Pick up Douglas Anderson's UFSHC doc fix - Document 8998 UFSHC binding - Improve UFS PHY binding doc - Put the UFS DT patch at the end of the series
Difference between v2 and v3: - Add qcom,msm8998-qmp-ufs-phy compat string and match it in the PHY driver - Drop vdd-hba-fixed-regulator - Write the reg addresses with full 32-bit width - Set regulator-allow-set-load only on the 3 rails used by UFS. - Revert the patch introducing ufshcd_set_vccq_rail_unused
Difference between v1 and v2: - New patch to add 'regulator-allow-set-load' prop to all vreg nodes - Rename rpmcc node to 'clock-controller' + Add Review tags - Drop UFS pinctrl gymnastics (not required, probably left enabled in bootloader) - Delete GCC_UFS_ICE_CORE_CLK (ICE not used upstream, I think) - Fix sizes of ufsphy register areas based on Jeffrey's feedback - Hack ufshcd_set_vccq_rail_unused into a NOP to work around lock up + reboot
Marc Gonzalez (3): dt-bindings: ufs: Add msm8998 compatible string arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load arm64: dts: qcom: msm8998: Add UFS nodes
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 1 + arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 22 +++++++ arch/arm64/boot/dts/qcom/msm8998.dtsi | 65 +++++++++++++++++++ 3 files changed, 88 insertions(+)
-- 2.17.1
| |