lkml.org 
[lkml]   [2019]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 05/12] arm64: dts: msm8998: thermal: Fix the cpu sensor numbers
Date
The silver cluster (typically cpu0-3) are monitored by sensor IDs 1-3 on
tsens controller 0. The gold cluster (typically cpu4-7) are monitored by
sensor IDs 7-10 on tsens controller 0.

Fixes: 4449b6f248d9a1 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones")
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index db4cb687126b..662ca458e64a 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -336,7 +336,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens0 6>;
+ thermal-sensors = <&tsens0 1>;

trips {
cpu_alert0: trip0 {
@@ -357,7 +357,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens0 7>;
+ thermal-sensors = <&tsens0 2>;

trips {
cpu_alert1: trip0 {
@@ -378,7 +378,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens0 8>;
+ thermal-sensors = <&tsens0 3>;

trips {
cpu_alert2: trip0 {
@@ -399,7 +399,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens0 9>;
+ thermal-sensors = <&tsens0 4>;

trips {
cpu_alert3: trip0 {
@@ -420,7 +420,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens0 10>;
+ thermal-sensors = <&tsens0 7>;

trips {
cpu_alert4: trip0 {
@@ -441,7 +441,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens0 11>;
+ thermal-sensors = <&tsens0 8>;

trips {
cpu_alert5: trip0 {
@@ -462,7 +462,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens1 0>;
+ thermal-sensors = <&tsens0 9>;

trips {
cpu_alert6: trip0 {
@@ -483,7 +483,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;

- thermal-sensors = <&tsens1 1>;
+ thermal-sensors = <&tsens0 10>;

trips {
cpu_alert7: trip0 {
--
2.17.1
\
 
 \ /
  Last update: 2019-02-18 13:36    [W:0.121 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site