lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: endpoint: functions: use memcpy_fromio()/memcpy_toio()
On Mon, Feb 11, 2019 at 05:04:00PM +0800, Wen Yang wrote:
> Use the IO memcpy() functions when copying from/to IO memory.
> These locations were found via sparse.
>
> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
> Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> CC: Bjorn Helgaas <bhelgaas@google.com>
> CC: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> CC: Niklas Cassel <niklas.cassel@axis.com>
> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> CC: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
> CC: linux-pci@vger.kernel.org
> CC: linux-kernel@vger.kernel.org
> ---
> drivers/pci/endpoint/functions/pci-epf-test.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)

Applied, with updated tags to pci/endpoint for v5.1, thanks.

Lorenzo

> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index 3e86fa3..4bbd26e 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -175,7 +175,7 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
> goto err_map_addr;
> }
>
> - memcpy(buf, src_addr, reg->size);
> + memcpy_fromio(buf, src_addr, reg->size);
>
> crc32 = crc32_le(~0, buf, reg->size);
> if (crc32 != reg->checksum)
> @@ -230,7 +230,7 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
> get_random_bytes(buf, reg->size);
> reg->checksum = crc32_le(~0, buf, reg->size);
>
> - memcpy(dst_addr, buf, reg->size);
> + memcpy_toio(dst_addr, buf, reg->size);
>
> /*
> * wait 1ms inorder for the write to complete. Without this delay L3
> --
> 2.9.5
>

\
 
 \ /
  Last update: 2019-02-11 17:20    [W:0.046 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site