lkml.org 
[lkml]   [2019]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ath10k: Handle "invalid" BDFs for msm8998 devices
Date
When the BDF download QMI message has the end field set to 1, it signals
the end of the transfer, and triggers the firmware to do a CRC check. The
BDFs for msm8998 devices fail this check, yet the firmware is happy to
still use the BDF. It appears that this error is not caught by the
downstream drive by concidence, therefore there are production devices
in the field where this issue needs to be handled otherwise we cannot
support wifi on them. So, attempt to detect this scenario as best we can
and treat it as non-fatal.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
---
drivers/net/wireless/ath/ath10k/qmi.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index eb618a2652db..5ff8cfc93778 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -265,10 +265,13 @@ static int ath10k_qmi_bdf_dnld_send_sync(struct ath10k_qmi *qmi)
goto out;

if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
- ath10k_err(ar, "failed to download board data file: %d\n",
- resp.resp.error);
- ret = -EINVAL;
- goto out;
+ if (!(req->end == 1 &&
+ resp.resp.result == QMI_ERR_MALFORMED_MSG_V01)) {
+ ath10k_err(ar, "failed to download board data file: %d\n",
+ resp.resp.error);
+ ret = -EINVAL;
+ goto out;
+ }
}

remaining -= req->data_len;
--
2.17.1
\
 
 \ /
  Last update: 2019-11-07 00:48    [W:0.072 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site