lkml.org 
[lkml]   [2019]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 2/2] arm64: dts: qcom: sc7180: Add nodes for eMMC and SD card
Date
Add sdhc instances for supporting eMMC and SD-card on sc7180.
The regulators should be in HPM state for proper functionality of
eMMC and SD-card. Updating corresponding regulators accordingly.

Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
---

This depends on the patch series (dt support for sc7180):
https://lkml.org/lkml/2019/11/8/149
---
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 32 +++++++-
arch/arm64/boot/dts/qcom/sc7180.dtsi | 136 ++++++++++++++++++++++++++++++++
2 files changed, 164 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 189254f..583c42c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -11,6 +11,7 @@
#include "sc7180.dtsi"
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
+#include <dt-bindings/gpio/gpio.h>

/ {
model = "Qualcomm Technologies, Inc. SC7180 IDP";
@@ -103,7 +104,7 @@
vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1952000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};

vreg_l13a_1p8: ldo13 {
@@ -145,7 +146,7 @@
vreg_l19a_2p9: ldo19 {
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};

@@ -191,7 +192,7 @@
vreg_l6c_2p9: ldo6 {
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};

vreg_l7c_3p0: ldo7 {
@@ -209,7 +210,7 @@
vreg_l9c_2p9: ldo9 {
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <3304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};

vreg_l10c_3p3: ldo10 {
@@ -400,3 +401,26 @@
bias-pull-up;
};
};
+
+&sdhc_1 {
+ status = "ok";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+ vmmc-supply = <&vreg_l19a_2p9>;
+ vqmmc-supply = <&vreg_l12a_1p8>;
+
+};
+
+&sdhc_2 {
+ status = "ok";
+
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+ vmmc-supply = <&vreg_l9c_2p9>;
+ vqmmc-supply = <&vreg_l6c_2p9>;
+
+ cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 666e9b9..207d44f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -897,6 +897,100 @@
function = "qup15";
};
};
+
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2_on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ sd-cd {
+ pins = "gpio69";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_off: sdc2_off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ sd-cd {
+ pins = "gpio69";
+ bias-pull-down;
+ };
+ };
};

qspi: spi@88dc000 {
@@ -911,6 +1005,48 @@
status = "disabled";
};

+ sdhc_1: sdhci@7c4000 {
+ compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x7c4000 0 0x1000>;
+ reg-names = "hc_mem";
+
+ interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ bus-width = <8>;
+ non-removable;
+
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@8804000 {
+ compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
+ reg-names = "hc_mem";
+
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core","iface";
+
+ bus-width = <4>;
+
+ status = "disabled";
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c440000 0 0x1100>,
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2019-11-27 12:50    [W:0.049 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site