lkml.org 
[lkml]   [2019]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: media: meson-ao-cec: convert to yaml
Date
Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic AO-CEC controller over to a YAML schemas.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../media/amlogic,meson-gx-ao-cec.yaml | 91 +++++++++++++++++++
.../bindings/media/meson-ao-cec.txt | 37 --------
2 files changed, 91 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
delete mode 100644 Documentation/devicetree/bindings/media/meson-ao-cec.txt

diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
new file mode 100644
index 000000000000..41197578f19a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson AO-CEC Controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+ The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
+ to handle communication between HDMI connected devices over the CEC bus.
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-gx-ao-cec # GXBB, GXL, GXM, G12A and SM1 AO_CEC_A module
+ - amlogic,meson-g12a-ao-cec # G12A AO_CEC_B module
+ - amlogic,meson-sm1-ao-cec # SM1 AO_CEC_B module
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ hdmi-phandle:
+ description: phandle to the HDMI controller
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson-gx-ao-cec
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: AO-CEC clock
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson-g12a-ao-cec
+ - amlogic,meson-sm1-ao-cec
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: AO-CEC clock generator source
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: oscin
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - hdmi-phandle
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ cec_AO: cec@100 {
+ compatible = "amlogic,meson-gx-ao-cec";
+ reg = <0x0 0x00100 0x0 0x14>;
+ interrupts = <199>;
+ clocks = <&clkc_cec>;
+ clock-names = "core";
+ hdmi-phandle = <&hdmi_tx>;
+ };
+
diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt
deleted file mode 100644
index ad92ee41c0dd..000000000000
--- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Amlogic Meson AO-CEC driver
-
-The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
-to handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
- - compatible : value should be following depending on the SoC :
- For GXBB, GXL, GXM, G12A and SM1 (AO_CEC_A module) :
- "amlogic,meson-gx-ao-cec"
- For G12A (AO_CEC_B module) :
- "amlogic,meson-g12a-ao-cec"
- For SM1 (AO_CEC_B module) :
- "amlogic,meson-sm1-ao-cec"
-
- - reg : Physical base address of the IP registers and length of memory
- mapped region.
-
- - interrupts : AO-CEC interrupt number to the CPU.
- - clocks : from common clock binding: handle to AO-CEC clock.
- - clock-names : from common clock binding, must contain :
- For GXBB, GXL, GXM, G12A and SM1 (AO_CEC_A module) :
- - "core"
- For G12A, SM1 (AO_CEC_B module) :
- - "oscin"
- corresponding to entry in the clocks property.
- - hdmi-phandle: phandle to the HDMI controller
-
-Example:
-
-cec_AO: cec@100 {
- compatible = "amlogic,meson-gx-ao-cec";
- reg = <0x0 0x00100 0x0 0x14>;
- interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc_AO CLKID_AO_CEC_32K>;
- clock-names = "core";
- hdmi-phandle = <&hdmi_tx>;
-};
--
2.22.0
\
 
 \ /
  Last update: 2019-10-21 14:13    [W:0.447 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site