lkml.org 
[lkml]   [2019]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Bluetooth: hci_qca: Add delay for wcn3990 stability
Date
On the msm8998 mtp, the response to the baudrate change command is never
received. On the Lenovo Miix 630, the response to the baudrate change
command is corrupted - "Frame reassembly failed (-84)".

Adding a 50ms delay before re-enabling flow to receive the baudrate change
command response from the wcn3990 addesses both issues, and allows
bluetooth to become functional.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
---
drivers/bluetooth/hci_qca.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index e3164c200eac..265fc60c3850 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1156,8 +1156,10 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
host_set_baudrate(hu, speed);

error:
- if (qca_is_wcn399x(soc_type))
+ if (qca_is_wcn399x(soc_type)) {
+ msleep(50);
hci_uart_set_flow_control(hu, false);
+ }

if (soc_type == QCA_WCN3990) {
/* Wait for the controller to send the vendor event
--
2.17.1
\
 
 \ /
  Last update: 2019-10-17 23:31    [W:1.441 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site