lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/9] dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60
Date
From: Tudor Ambarus <tudor.ambarus@microchip.com>

The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
.../devicetree/bindings/spi/atmel-quadspi.txt | 28 ++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
index e9dae6264d89..e7b7f297c5d7 100644
--- a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt
@@ -1,14 +1,22 @@
* Atmel Quad Serial Peripheral Interface (QSPI)

Required properties:
-- compatible: Should be "atmel,sama5d2-qspi".
+- compatible: Should be one of the following
+ - "atmel,sama5d2-qspi"
+ - "microchip,sam9x60-qspi"
- reg: Should contain the locations and lengths of the base registers
and the mapped memory.
- reg-names: Should contain the resource reg names:
- qspi_base: configuration register address space
- qspi_mmap: memory mapped address space
- interrupts: Should contain the interrupt for the device.
-- clocks: The phandle of the clock needed by the QSPI controller.
+- clocks: - "atmel,sama5d2-qspi": the phandle of the clock needed by the
+ QSPI controller.
+ - "microchip,sam9x60-qspi": should reference the peripheral
+ and system QSPI clocks.
+- clock-names: Only for sam9x60 - should contain two strigs:
+ - "pclk" for the peripheral clock
+ - "qspick" for the system clock
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.

@@ -29,3 +37,19 @@ spi@f0020000 {
...
};
};
+
+qspi@f0014000 {
+ compatible = "microchip,sam9x60-qspi";
+ reg = <0xf0014000 0x100>, <0x70000000 0x08000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+ clock-names = "pclk", "qspick";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+
+ flash@0 {
+ ...
+ };
+};
--
2.9.5
\
 
 \ /
  Last update: 2019-01-30 16:09    [W:0.318 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site