lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] gpio: pca953x: reduce indentation level in pca953x_irq_setup()
Date
The current design of pca953x_irq_setup() is:

if (all conditions to support IRQ are met) {
lots of code to support IRQs, which goes to a serious indentation
level.
}

return 0;

It makes more sense to handle this like this:

if (!all conditions to support IRQ are met)
return 0;

handle IRQ support

This commit does just this change, reducing by one tab the indentation
level of the IRQ setup code. Thanks to this reduced indentation level,
we are less restricted by the 80-column limit, and we can have more
function arguments on the same line.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
drivers/gpio/gpio-pca953x.c | 84 ++++++++++++++++++-------------------
1 file changed, 42 insertions(+), 42 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 0dc96419efe3..4f91ce497dd1 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -702,53 +702,53 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
int reg_direction[MAX_BANK];
int ret, i;

- if (client->irq && irq_base != -1
- && (chip->driver_data & PCA_INT)) {
- ret = pca953x_read_regs(chip,
- chip->regs->input, chip->irq_stat);
- if (ret)
- return ret;
+ if (!client->irq)
+ return 0;

- /*
- * There is no way to know which GPIO line generated the
- * interrupt. We have to rely on the previous read for
- * this purpose.
- */
- regmap_bulk_read(chip->regmap, chip->regs->direction,
- reg_direction, NBANK(chip));
- for (i = 0; i < NBANK(chip); i++)
- chip->irq_stat[i] &= reg_direction[i];
- mutex_init(&chip->irq_lock);
-
- ret = devm_request_threaded_irq(&client->dev,
- client->irq,
- NULL,
- pca953x_irq_handler,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT |
- IRQF_SHARED,
- dev_name(&client->dev), chip);
- if (ret) {
- dev_err(&client->dev, "failed to request irq %d\n",
- client->irq);
- return ret;
- }
+ if (irq_base == -1)
+ return 0;

- ret = gpiochip_irqchip_add_nested(&chip->gpio_chip,
- &pca953x_irq_chip,
- irq_base,
- handle_simple_irq,
- IRQ_TYPE_NONE);
- if (ret) {
- dev_err(&client->dev,
- "could not connect irqchip to gpiochip\n");
- return ret;
- }
+ if (!(chip->driver_data & PCA_INT))
+ return 0;

- gpiochip_set_nested_irqchip(&chip->gpio_chip,
- &pca953x_irq_chip,
- client->irq);
+ ret = pca953x_read_regs(chip, chip->regs->input, chip->irq_stat);
+ if (ret)
+ return ret;
+
+ /*
+ * There is no way to know which GPIO line generated the
+ * interrupt. We have to rely on the previous read for
+ * this purpose.
+ */
+ regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction,
+ NBANK(chip));
+ for (i = 0; i < NBANK(chip); i++)
+ chip->irq_stat[i] &= reg_direction[i];
+ mutex_init(&chip->irq_lock);
+
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, pca953x_irq_handler,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT |
+ IRQF_SHARED,
+ dev_name(&client->dev), chip);
+ if (ret) {
+ dev_err(&client->dev, "failed to request irq %d\n",
+ client->irq);
+ return ret;
+ }
+
+ ret = gpiochip_irqchip_add_nested(&chip->gpio_chip, &pca953x_irq_chip,
+ irq_base, handle_simple_irq,
+ IRQ_TYPE_NONE);
+ if (ret) {
+ dev_err(&client->dev,
+ "could not connect irqchip to gpiochip\n");
+ return ret;
}

+ gpiochip_set_nested_irqchip(&chip->gpio_chip, &pca953x_irq_chip,
+ client->irq);
+
return 0;
}

--
2.20.1
\
 
 \ /
  Last update: 2019-01-16 10:33    [W:0.708 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site